Skip to content
AnsweredAAbutPierQ&A #2079702007-11-06 23:33 · Views 41

Tie bar placement in columns?

1. 기둥부 띠철근배치에서 광주방향 설계검토를 클릭한결과 (4) 필요철근량 계산 Av Av = 0.35 x B x s / fy = 770.000 mm² ; 최소 전단 철근 필요시 띠철근의 수직 간격 S = 300.00 mm d = 1672.320 mm fy = 300.00 MPa 사용철근량 : D19 x 2EA = 573.000 mm² D19 x 2EA x 300/0 = 1.#IO mm² AvUse = 1.#IO mm² ≥ 770.000 mm² ∴ O.K 위와 같이 표기되는 이유가 무엇인지요???

Answer

안녕하세요. 한길아이티입니다. 올려드리는 파일 참조하시면 됩니다. 감사합니다.

More in this list

StatusProductNo.TitleViewsDate
AnsweredAAbutPier#268560Question about the calculation report1782026-09-29
AnsweredAAbutPier#268548Tendon force when placing tendons in the pier cap2152026-09-29
AnsweredAAbutPier#268520Pier seismic check2442026-09-23
AnsweredAAbutPier#268509Transverse reinforcement factor, K1912026-09-22
AnsweredAAbutPier#268492Girder positions in slab dimensions3312026-09-21
AnsweredAAbutPier#268483Transverse pile member forces are "0" in pier pile foundation check1982026-09-21
AnsweredAAbutPier#268482Top and bottom rebar detailing error in pier foundation STM2152026-09-21
AnsweredAAbutPier#268476Question about slab dimensions3032026-09-19
AnsweredAAbutPier#268470Settlement and bearing capacity2662026-09-18
AnsweredAAbutPier#268462Superstructure wind load in the calculation report1892026-09-18
AnsweredAAbutPier#268451Changing bearing location872026-09-18
AnsweredAAbutPier#268445Main rebar placement2622026-09-17
AnsweredAAbutPier#268438Modeling error in seismic analysis4012026-09-17
AnsweredAAbutPier#268433Pier alignment center1862026-09-17
AnsweredAAbutPier#268431Please check the design ground surface displacement2212026-09-17
AnsweredAAbutPier#268422Question about pier2472026-09-17
AnsweredAAbutPier#268416Wprov calculation in the structural calculation report2342026-09-17
AnsweredAAbutPier#268402Increasing the number of column main rebars3822026-09-16
AnsweredAAbutPier#268392Question about cast-in-place piles2192026-09-16
AnsweredAAbutPier#268387Error when entering reinforcing rebar1712026-09-16
Sign in to ask