Skip to content
AnsweredAAbutPierQ&A #2069382007-10-08 22:18 · Views 52

Error in multi-column pier calculation (stability check)

다주식교각 계산시 하중고정으로 교각수를 늘려서 계산시 기초안정검토시 에러가 발생합니다. 단순히 횡방향 폭을 늘려 상부하중 동일 적용시 기초안정검토에서 에러가 발생합니다 첨부:원본화일 5중형교각화일 수정바랍니다.

Answer2007-10-09 14:25

안녕하세요. 한길아이티입니다. 올려주신화일에서 apr화일이 두개가 동일한것으로 파악됩니다. 비교화일을 다시 올려주시기 바랍니다. 감사합니다.

Follow-up2007-10-09 15:26

>>안녕하세요. 한길아이티입니다. 올려주신화일에서 apr화일이 두개가 동일한것으로 파악됩니다. 비교화일을 다시 올려주시기 바랍니다. 감사합니다.

Follow-up2007-10-09 17:29

>>>>안녕하세요. 한길아이티입니다. 올려주신화일에서 apr화일이 두개가 동일한것으로 파악됩니다. 비교화일을 다시 올려주시기 바랍니다. 감사합니다.

Answer2007-10-09 17:52

안녕하세요. 한길아이티입니다. 교각설계환경에서 기초지반의 극한지지력이 0으로 설정되어 있읍니다. 이런경우 허용지지력산정식에서 산정된 값을 사용하게 됩니다. 하지만 올려주신 화일의 경우 허용지지력이 70tf/m2로 되어 있으므로 첨부화일과 같이 입력을 하셔야지 허용지지력이 700kN/m2으로 적용됩니다. 감사합니다.

Attachments on this post were deleted after the retention period (3 years after the last answer) and can no longer be downloaded. If you need the same material, please contact us.

More in this list

StatusProductNo.TitleViewsDate
AnsweredAAbutPier#268560Question about the calculation report1802026-09-29
AnsweredAAbutPier#268548Tendon force when placing tendons in the pier cap2172026-09-29
AnsweredAAbutPier#268520Pier seismic check2452026-09-23
AnsweredAAbutPier#268509Transverse reinforcement factor, K1922026-09-22
AnsweredAAbutPier#268492Girder positions in slab dimensions3342026-09-21
AnsweredAAbutPier#268483Transverse pile member forces are "0" in pier pile foundation check1982026-09-21
AnsweredAAbutPier#268482Top and bottom rebar detailing error in pier foundation STM2162026-09-21
AnsweredAAbutPier#268476Question about slab dimensions3052026-09-19
AnsweredAAbutPier#268470Settlement and bearing capacity2682026-09-18
AnsweredAAbutPier#268462Superstructure wind load in the calculation report1902026-09-18
AnsweredAAbutPier#268451Changing bearing location872026-09-18
AnsweredAAbutPier#268445Main rebar placement2632026-09-17
AnsweredAAbutPier#268438Modeling error in seismic analysis4022026-09-17
AnsweredAAbutPier#268433Pier alignment center1862026-09-17
AnsweredAAbutPier#268431Please check the design ground surface displacement2232026-09-17
AnsweredAAbutPier#268422Question about pier2472026-09-17
AnsweredAAbutPier#268416Wprov calculation in the structural calculation report2352026-09-17
AnsweredAAbutPier#268402Increasing the number of column main rebars3892026-09-16
AnsweredAAbutPier#268392Question about cast-in-place piles2202026-09-16
AnsweredAAbutPier#268387Error when entering reinforcing rebar1752026-09-16
Sign in to ask