Skip to content
AnsweredAAbutPierQ&A #2065612007-09-28 17:54 · Views 38

In seismic design

단면타입설정에서 단위m당 중량을 각 단면별 따로 적용이 안되고 한 단면에 넣으면 전체가 다 같이 변경됩니다.. 검토바랍니다. 경계조건이 교대에는 적용이 되는데 교각에는 전혀 적용이 되어 있지 않는데 어떻게 적용하는지 가르쳐 주세요... 단일현장타설말뚝은 지반아래 말뚝에는 스프링을 1m간격으로 X,Y축으로 적용시키던데.. 그래서 모델링 오류가 뜨네요... 검토부탁드립니다..

Answer

안녕하세요. 한길아이티입니다. 수정하여 패치하겠습니다. 감사합니다.

More in this list

StatusProductNo.TitleViewsDate
AnsweredAAbutPier#268560Question about the calculation report1802026-09-29
AnsweredAAbutPier#268548Tendon force when placing tendons in the pier cap2172026-09-29
AnsweredAAbutPier#268520Pier seismic check2472026-09-23
AnsweredAAbutPier#268509Transverse reinforcement factor, K1922026-09-22
AnsweredAAbutPier#268492Girder positions in slab dimensions3352026-09-21
AnsweredAAbutPier#268483Transverse pile member forces are "0" in pier pile foundation check1982026-09-21
AnsweredAAbutPier#268482Top and bottom rebar detailing error in pier foundation STM2162026-09-21
AnsweredAAbutPier#268476Question about slab dimensions3062026-09-19
AnsweredAAbutPier#268470Settlement and bearing capacity2682026-09-18
AnsweredAAbutPier#268462Superstructure wind load in the calculation report1902026-09-18
AnsweredAAbutPier#268451Changing bearing location872026-09-18
AnsweredAAbutPier#268445Main rebar placement2632026-09-17
AnsweredAAbutPier#268438Modeling error in seismic analysis4022026-09-17
AnsweredAAbutPier#268433Pier alignment center1862026-09-17
AnsweredAAbutPier#268431Please check the design ground surface displacement2232026-09-17
AnsweredAAbutPier#268422Question about pier2472026-09-17
AnsweredAAbutPier#268416Wprov calculation in the structural calculation report2352026-09-17
AnsweredAAbutPier#268402Increasing the number of column main rebars3892026-09-16
AnsweredAAbutPier#268392Question about cast-in-place piles2212026-09-16
AnsweredAAbutPier#268387Error when entering reinforcing rebar1752026-09-16
Sign in to ask