Skip to content
AnsweredAAbutPierQ&A #2062292007-09-12 00:39 · Views 12

About seismic design...

내진해석은 되는데 일반적으로 정형구조인경우 내진모드 10모드 이내에서 질량참여율이 90%가 나와야하는데 전형적인 PSC BEAM교인데 25모드까지 가도 질량 참여율이 90%나오질 않는군요. 모델에 문제가 있는거 같은데 검토 부탁드립니다.

Answer

안녕하세요. 한길아이티입니다. 내진해석모델링에서는 해석후 경고창(질량참여율에 대해서)부분은 프로그램에서 사용자에게 질량참여율에 대해서 알려주는 기능입니다. 말씀하신 부분은 사용성과 구조적거동에 대한 관련부분이므로 사용자께서 판단하셔야 하는 부분입니다. 감사합니다.

More in this list

StatusProductNo.TitleViewsDate
AnsweredAAbutPier#268560Question about the calculation report1802026-09-29
AnsweredAAbutPier#268548Tendon force when placing tendons in the pier cap2182026-09-29
AnsweredAAbutPier#268520Pier seismic check2482026-09-23
AnsweredAAbutPier#268509Transverse reinforcement factor, K1922026-09-22
AnsweredAAbutPier#268492Girder positions in slab dimensions3352026-09-21
AnsweredAAbutPier#268483Transverse pile member forces are "0" in pier pile foundation check1982026-09-21
AnsweredAAbutPier#268482Top and bottom rebar detailing error in pier foundation STM2162026-09-21
AnsweredAAbutPier#268476Question about slab dimensions3062026-09-19
AnsweredAAbutPier#268470Settlement and bearing capacity2692026-09-18
AnsweredAAbutPier#268462Superstructure wind load in the calculation report1912026-09-18
AnsweredAAbutPier#268451Changing bearing location872026-09-18
AnsweredAAbutPier#268445Main rebar placement2632026-09-17
AnsweredAAbutPier#268438Modeling error in seismic analysis4042026-09-17
AnsweredAAbutPier#268433Pier alignment center1862026-09-17
AnsweredAAbutPier#268431Please check the design ground surface displacement2232026-09-17
AnsweredAAbutPier#268422Question about pier2472026-09-17
AnsweredAAbutPier#268416Wprov calculation in the structural calculation report2352026-09-17
AnsweredAAbutPier#268402Increasing the number of column main rebars3912026-09-16
AnsweredAAbutPier#268392Question about cast-in-place piles2222026-09-16
AnsweredAAbutPier#268387Error when entering reinforcing rebar1752026-09-16
Sign in to ask