Skip to content
AnsweredAAbutPierQ&A #2060302007-08-31 20:15 · Views 28

Question about pier safety factor

교각 단면제원에서 설계검토를 하면 교각안전률이 너무 높은것 같은데 이유를 찾지 못하겠어요 어느정도 높은게 아니고 너무 높은거 같아서요 p1,p2.p3전부 다 높아요 파일 첨부해 드립니다. 검토한번만 해주세요 부탁드릴께요

Answer

안녕하세요. 한길아이티입니다. 설계검토는 케이스에 따라 달라지게 됩니다. 결국에 구조물을 설계시에는 제일 불리한경우가 지배적이기 때문입니다. 참고로 단면도제원에서 보이는 설계검토는 직접기초로 보고 검토하는것이고 기초부설정에서 말뚝기초에 대한 검토를 확인하실수 있읍니다. 사합니다.

Attachments on this post were deleted after the retention period (3 years after the last answer) and can no longer be downloaded. If you need the same material, please contact us.

More in this list

StatusProductNo.TitleViewsDate
AnsweredAAbutPier#268560Question about the calculation report1802026-09-29
AnsweredAAbutPier#268548Tendon force when placing tendons in the pier cap2182026-09-29
AnsweredAAbutPier#268520Pier seismic check2482026-09-23
AnsweredAAbutPier#268509Transverse reinforcement factor, K1922026-09-22
AnsweredAAbutPier#268492Girder positions in slab dimensions3352026-09-21
AnsweredAAbutPier#268483Transverse pile member forces are "0" in pier pile foundation check1982026-09-21
AnsweredAAbutPier#268482Top and bottom rebar detailing error in pier foundation STM2162026-09-21
AnsweredAAbutPier#268476Question about slab dimensions3062026-09-19
AnsweredAAbutPier#268470Settlement and bearing capacity2692026-09-18
AnsweredAAbutPier#268462Superstructure wind load in the calculation report1912026-09-18
AnsweredAAbutPier#268451Changing bearing location872026-09-18
AnsweredAAbutPier#268445Main rebar placement2642026-09-17
AnsweredAAbutPier#268438Modeling error in seismic analysis4042026-09-17
AnsweredAAbutPier#268433Pier alignment center1862026-09-17
AnsweredAAbutPier#268431Please check the design ground surface displacement2232026-09-17
AnsweredAAbutPier#268422Question about pier2482026-09-17
AnsweredAAbutPier#268416Wprov calculation in the structural calculation report2362026-09-17
AnsweredAAbutPier#268402Increasing the number of column main rebars3912026-09-16
AnsweredAAbutPier#268392Question about cast-in-place piles2222026-09-16
AnsweredAAbutPier#268387Error when entering reinforcing rebar1752026-09-16
Sign in to ask