Seismic analysis error
자꾸 번거롭게 해서 죄송합니다. 내진해석시 모델링 경고 후 비정상적인 데이타라는 에러와 함께 중단됩니다. 오류 원인이 무었인지 확인 부탁드립니다.
Answer
안녕하세요. 한길아이티입니다. 보내주신화일의 검토결과는 다음과 같읍니다. 크게 3가지 부분에 대해 말씀드리겠읍니다. 1.Apier에서는 시점에 신축유간이 항상 존재해야 합니다. 그렇지 않은 경우 내진 모델링이 생성되지 않읍니다. 따라서 교량기본구성입력에서 지점1를 슬래브분리 있음으로 선택하신 후 시점station을 이동하신 뒤 지간구성입력에서 p1의 p12를 신축유간이 있다고 보고 입력합니다. 이때의 수치는 지점각도입력에서 p1의 유간을 어떻게 입력하느냐에 따라 달라지게 됩니다. 2.교각기초부설정-p2,p3의 말뚝길이 PL이 잘못 들어간 것 같읍니다. 단위가 mm이므로 이단위에 맞게 입력 하셔야 합니다. 3.교각교좌면제원입력에서 p1,p2,p3의 KV,KH의 값이 일부 누락되었읍니다. 위와 같이 하면 내진해석의 모델링에 에러가 사라지게 됩니다. 참고로 위작업에 대한 예로 샘플을 갖이 올려드립니다. 그리고 슬래브제원입력에서 각지점별 후면에 대한 횡단을 확인하시기 바랍니다. 또한 교량시점이 10이전의 수치가 들어가야하는데 선형화일의 BP가 10으로 시작하는것 같읍니다. 선형화일에 대한 조정도 해야될 것 같읍니다. 감사합니다.
More in this list
| Status | Product | No. | Title | Views | Date |
|---|---|---|---|---|---|
| Answered | AAbutPier | #268560 | Question about the calculation report | 180 | 2026-09-29 |
| Answered | AAbutPier | #268548 | Tendon force when placing tendons in the pier cap | 218 | 2026-09-29 |
| Answered | AAbutPier | #268520 | Pier seismic check | 248 | 2026-09-23 |
| Answered | AAbutPier | #268509 | Transverse reinforcement factor, K | 192 | 2026-09-22 |
| Answered | AAbutPier | #268492 | Girder positions in slab dimensions | 335 | 2026-09-21 |
| Answered | AAbutPier | #268483 | Transverse pile member forces are "0" in pier pile foundation check | 198 | 2026-09-21 |
| Answered | AAbutPier | #268482 | Top and bottom rebar detailing error in pier foundation STM | 216 | 2026-09-21 |
| Answered | AAbutPier | #268476 | Question about slab dimensions | 306 | 2026-09-19 |
| Answered | AAbutPier | #268470 | Settlement and bearing capacity | 269 | 2026-09-18 |
| Answered | AAbutPier | #268462 | Superstructure wind load in the calculation report | 191 | 2026-09-18 |
| Answered | AAbutPier | #268451 | Changing bearing location | 87 | 2026-09-18 |
| Answered | AAbutPier | #268445 | Main rebar placement | 269 | 2026-09-17 |
| Answered | AAbutPier | #268438 | Modeling error in seismic analysis | 404 | 2026-09-17 |
| Answered | AAbutPier | #268433 | Pier alignment center | 186 | 2026-09-17 |
| Answered | AAbutPier | #268431 | Please check the design ground surface displacement | 227 | 2026-09-17 |
| Answered | AAbutPier | #268422 | Question about pier | 251 | 2026-09-17 |
| Answered | AAbutPier | #268416 | Wprov calculation in the structural calculation report | 242 | 2026-09-17 |
| Answered | AAbutPier | #268402 | Increasing the number of column main rebars | 391 | 2026-09-16 |
| Answered | AAbutPier | #268392 | Question about cast-in-place piles | 222 | 2026-09-16 |
| Answered | AAbutPier | #268387 | Error when entering reinforcing rebar | 175 | 2026-09-16 |