Average section values of abutment wall
교대 설계시 좌,우측에 편경사를 주어서 교대 footing 바로 위 벽체의 단면 높이 좌: 1.538m, 우: 1.692m 값을 얻었습니다.그런데 수량산출서에서 벽체의 평균단면 높이는 1.653 m 로 출력되었는데 일반적으로 사용하는 양단면 평균법은 아닌것 같고 어떤 근거로 1.653 m 란 값이 나왔는지 궁금합니다. 교대 헌치 바로 밑에서부터 푸팅 위까지의 벽체 높이이며 파일을 첨부해드리겠습니다.
안녕하세요. 한길아이티입니다. 화일과 함께 내용을 올려주시기 바랍니다. 감사합니다. 안녕하세요. 한길아이티입니다. 우선 평균단면의 높이산정방법은 다음과같읍니다. 교대정면도에서 흉벽상단에 구간별EL이 나오게 됩니다. 따라서 구간별 H가 산출가능하며 다음과 같은순서로 산정됩니다. {(H1+H2)/2*B1+(H2+H3)/2*B2+(H3+H4)/2*B3......}/(B1+B2+...)=평균높이EL {(78.875+78.867)/2*0.5+(78.875+79.029)/2*4.25+(79.029+79.013)/2*4.25+(79.013+79.021)/2*0.5}/ (0.5+4.25+4.25+0.5)=(39.436+335.546+335.839+39.509)/9.5=750.330/9.5=78.982 따라서 H=78.982-71.029=7.953 평균높이 7.953에서0.88+3.22+0.8+1.4을 빼면 1.653이 나오게 됩니다. 감사합니다.
Attachments on this post were deleted after the retention period (3 years after the last answer) and can no longer be downloaded. If you need the same material, please contact us.
More in this list
| Status | Product | No. | Title | Views | Date |
|---|---|---|---|---|---|
| Answered | AAbutPier | #268560 | Question about the calculation report | 180 | 2026-09-29 |
| Answered | AAbutPier | #268548 | Tendon force when placing tendons in the pier cap | 218 | 2026-09-29 |
| Answered | AAbutPier | #268520 | Pier seismic check | 248 | 2026-09-23 |
| Answered | AAbutPier | #268509 | Transverse reinforcement factor, K | 192 | 2026-09-22 |
| Answered | AAbutPier | #268492 | Girder positions in slab dimensions | 335 | 2026-09-21 |
| Answered | AAbutPier | #268483 | Transverse pile member forces are "0" in pier pile foundation check | 198 | 2026-09-21 |
| Answered | AAbutPier | #268482 | Top and bottom rebar detailing error in pier foundation STM | 216 | 2026-09-21 |
| Answered | AAbutPier | #268476 | Question about slab dimensions | 306 | 2026-09-19 |
| Answered | AAbutPier | #268470 | Settlement and bearing capacity | 269 | 2026-09-18 |
| Answered | AAbutPier | #268462 | Superstructure wind load in the calculation report | 191 | 2026-09-18 |
| Answered | AAbutPier | #268451 | Changing bearing location | 87 | 2026-09-18 |
| Answered | AAbutPier | #268445 | Main rebar placement | 269 | 2026-09-17 |
| Answered | AAbutPier | #268438 | Modeling error in seismic analysis | 404 | 2026-09-17 |
| Answered | AAbutPier | #268433 | Pier alignment center | 186 | 2026-09-17 |
| Answered | AAbutPier | #268431 | Please check the design ground surface displacement | 227 | 2026-09-17 |
| Answered | AAbutPier | #268422 | Question about pier | 251 | 2026-09-17 |
| Answered | AAbutPier | #268416 | Wprov calculation in the structural calculation report | 242 | 2026-09-17 |
| Answered | AAbutPier | #268402 | Increasing the number of column main rebars | 391 | 2026-09-16 |
| Answered | AAbutPier | #268392 | Question about cast-in-place piles | 222 | 2026-09-16 |
| Answered | AAbutPier | #268387 | Error when entering reinforcing rebar | 175 | 2026-09-16 |