Skip to content
AnsweredAAbutPierQ&A #2025152007-03-06 05:36 · Views 27

Drawing generation error, please check

벽체 주철근이 이상하게 들어가네요 철근재료표에서 강제로 수정할려고 시도해보았으나 안되네요 확인부탁드립니다.

Answer

안녕하세요. 한길아이티입니다. 교대정면도에서 교좌면의 단차가 +,-가 교차할경우(오목형) 현재 프로그램에서 지원되지 않고 있읍니다. 이런경우 +,-교차하지 않도록 수작업을 하셔야 합니다. 그예로 교대정면도에서 DH1=-13.1,DH2=16.9인데 DH1이 0으로 되면 벽체부 철근이 제대로 생성됩니다. 개발중인 APier II에서는 지원할예정입니다. 감사합니다.

More in this list

StatusProductNo.TitleViewsDate
AnsweredAAbutPier#268560Question about the calculation report1802026-09-29
AnsweredAAbutPier#268548Tendon force when placing tendons in the pier cap2182026-09-29
AnsweredAAbutPier#268520Pier seismic check2482026-09-23
AnsweredAAbutPier#268509Transverse reinforcement factor, K1922026-09-22
AnsweredAAbutPier#268492Girder positions in slab dimensions3352026-09-21
AnsweredAAbutPier#268483Transverse pile member forces are "0" in pier pile foundation check1982026-09-21
AnsweredAAbutPier#268482Top and bottom rebar detailing error in pier foundation STM2162026-09-21
AnsweredAAbutPier#268476Question about slab dimensions3062026-09-19
AnsweredAAbutPier#268470Settlement and bearing capacity2692026-09-18
AnsweredAAbutPier#268462Superstructure wind load in the calculation report1912026-09-18
AnsweredAAbutPier#268451Changing bearing location872026-09-18
AnsweredAAbutPier#268445Main rebar placement2702026-09-17
AnsweredAAbutPier#268438Modeling error in seismic analysis4042026-09-17
AnsweredAAbutPier#268433Pier alignment center1862026-09-17
AnsweredAAbutPier#268431Please check the design ground surface displacement2272026-09-17
AnsweredAAbutPier#268422Question about pier2522026-09-17
AnsweredAAbutPier#268416Wprov calculation in the structural calculation report2422026-09-17
AnsweredAAbutPier#268402Increasing the number of column main rebars3912026-09-16
AnsweredAAbutPier#268392Question about cast-in-place piles2222026-09-16
AnsweredAAbutPier#268387Error when entering reinforcing rebar1752026-09-16
Sign in to ask