Review of file loaded from abeamdeck?
1. 먼저 어제 [한길 담당자]이사님과 통화한내용인데 다시한번 조언을 듣고자 이렇게 글올립니다. 지간구성입력에서의 길이가 전체적으로 상부에서 불러온 값들과 상이한점, 그리고 그에따른 뒷부분의 영향은 없다고 말씀하셨는데 지간각도입력에서 교량받침좌표 편집의 수정한교량받침좌표 부분이 체크되어 있기때문에 상관없다고 하셨는데 그럼애초에 지간구성입력항목을 상부에서 정확하게 불러와야 되지 않는지요 2. 내진해석단면입력에서 단면타입입력에 들어가보면 단면에 대하여 전체적으로 길이가 상이하므로 검토부탁드립니다. 3. 내진해석단면입력 항목에서 배경에 구조물 모델링이 보여지지 않음.
안녕하세요. 한길아이티입니다. 1.AbeamDeck에서 작업한 brx를 하부에서 import하면 지점각도입력-교량받침좌표편집-수정한 교량받침좌표가 on이 되어 상부에서 작업한 교량받침좌표를 그대로 불러들이게 됩니다. 수정한교량받침좌표가 on이 되어있는경우 지간구성입력에서 S1,P11등 기준위치에 대한 슈위치 거리는 무의미하게 됩니다.말씀하신것과 같이 상부에 설정한 슈위치까지의 거리는 현재 작업예정중이며 현재 하부설정에는 큰지장이 없으므로 작업을 하셔도 문제는 없읍니다. 따라서 이부분은 빠른시일내에 반영이 되도록 하겠읍니다. 2.내진해석단면입력에 나온 5경간의 간격은 상부에 작업한 교량의 길이가 검토결과 같읍니다. 30070.6+30049+30049+29999+30082.4=150.250 3.내진해석모델링까지 진행하신후 다시 내진해석단면입력항목으로 가시면 보이게 됩니다. 감사합니다.
More in this list
| Status | Product | No. | Title | Views | Date |
|---|---|---|---|---|---|
| Answered | AAbutPier | #268560 | Question about the calculation report | 180 | 2026-09-29 |
| Answered | AAbutPier | #268548 | Tendon force when placing tendons in the pier cap | 218 | 2026-09-29 |
| Answered | AAbutPier | #268520 | Pier seismic check | 248 | 2026-09-23 |
| Answered | AAbutPier | #268509 | Transverse reinforcement factor, K | 192 | 2026-09-22 |
| Answered | AAbutPier | #268492 | Girder positions in slab dimensions | 335 | 2026-09-21 |
| Answered | AAbutPier | #268483 | Transverse pile member forces are "0" in pier pile foundation check | 198 | 2026-09-21 |
| Answered | AAbutPier | #268482 | Top and bottom rebar detailing error in pier foundation STM | 216 | 2026-09-21 |
| Answered | AAbutPier | #268476 | Question about slab dimensions | 306 | 2026-09-19 |
| Answered | AAbutPier | #268470 | Settlement and bearing capacity | 269 | 2026-09-18 |
| Answered | AAbutPier | #268462 | Superstructure wind load in the calculation report | 191 | 2026-09-18 |
| Answered | AAbutPier | #268451 | Changing bearing location | 87 | 2026-09-18 |
| Answered | AAbutPier | #268445 | Main rebar placement | 270 | 2026-09-17 |
| Answered | AAbutPier | #268438 | Modeling error in seismic analysis | 404 | 2026-09-17 |
| Answered | AAbutPier | #268433 | Pier alignment center | 186 | 2026-09-17 |
| Answered | AAbutPier | #268431 | Please check the design ground surface displacement | 227 | 2026-09-17 |
| Answered | AAbutPier | #268422 | Question about pier | 252 | 2026-09-17 |
| Answered | AAbutPier | #268416 | Wprov calculation in the structural calculation report | 242 | 2026-09-17 |
| Answered | AAbutPier | #268402 | Increasing the number of column main rebars | 391 | 2026-09-16 |
| Answered | AAbutPier | #268392 | Question about cast-in-place piles | 222 | 2026-09-16 |
| Answered | AAbutPier | #268387 | Error when entering reinforcing rebar | 175 | 2026-09-16 |