Skip to content
AnsweredAAbutPierQ&A #2019542007-01-25 20:03 · Views 61

Response modification factor

7.기초설계에서 지진시 부재력은 소성설계시 값이며, 응답수정계수 R=(3.0)의 1/2을 적용한 값을 사용한다. 라고 표현되어 있습니다. 직접기초의 경우는 1/2을 적용 말뚝기초의 경우는 R값으로 나누어 주어야 되는 것이 아닌가요. 현재는 모든 기초에 대해 R의 1/2을 적용하고 있음 (도로교설계기준 2005년 P485)

Answer

안녕하세요. 한길아이티입니다. 설계기준에는 직접기초,말뚝기초의 경우 1/2R를 사용하라고 되어있으며 말뚝가구의 경우가 R을 적용하는것으로 되어있읍니다. 감사합니다.

More in this list

StatusProductNo.TitleViewsDate
AnsweredAAbutPier#268560Question about the calculation report1802026-09-29
AnsweredAAbutPier#268548Tendon force when placing tendons in the pier cap2182026-09-29
AnsweredAAbutPier#268520Pier seismic check2482026-09-23
AnsweredAAbutPier#268509Transverse reinforcement factor, K1922026-09-22
AnsweredAAbutPier#268492Girder positions in slab dimensions3352026-09-21
AnsweredAAbutPier#268483Transverse pile member forces are "0" in pier pile foundation check1982026-09-21
AnsweredAAbutPier#268482Top and bottom rebar detailing error in pier foundation STM2162026-09-21
AnsweredAAbutPier#268476Question about slab dimensions3062026-09-19
AnsweredAAbutPier#268470Settlement and bearing capacity2692026-09-18
AnsweredAAbutPier#268462Superstructure wind load in the calculation report1912026-09-18
AnsweredAAbutPier#268451Changing bearing location872026-09-18
AnsweredAAbutPier#268445Main rebar placement2712026-09-17
AnsweredAAbutPier#268438Modeling error in seismic analysis4042026-09-17
AnsweredAAbutPier#268433Pier alignment center1862026-09-17
AnsweredAAbutPier#268431Please check the design ground surface displacement2292026-09-17
AnsweredAAbutPier#268422Question about pier2522026-09-17
AnsweredAAbutPier#268416Wprov calculation in the structural calculation report2432026-09-17
AnsweredAAbutPier#268402Increasing the number of column main rebars3912026-09-16
AnsweredAAbutPier#268392Question about cast-in-place piles2222026-09-16
AnsweredAAbutPier#268387Error when entering reinforcing rebar1752026-09-16
Sign in to ask