Question on main and distribution rebar in the abutment coping under the bearing seat
보통 코핑부 주철근과 배력근 C.T.C를 따로 지정해 주는 옵션이 있는지 궁금합니다... 아무리 찾아봐도 어디 있는지 알수 가 없네여..부탁드립니다.. 그리고 평면도 제원에서 구영방향 A1 에 기초 평면 직각 처리를 하면 날개벽과 기초가 살짝 어긋나는데 어떻게 해결할 방법이 없는지 부탁드립니다. 추가 사항 교량 받침 위치 입력 에서 빔간격과 일반도 상에서 슈 간격이 1~2m이 오차가 발생하는데... 스큐교량이라도..정 치수가 떨어져야 하는거 아닌지 의문이 들어 질문 합니다.
안녕하세요. 한길아이티입니다. 1.코핑부 주철근에 직각으로 들어가는 철근은 사용자가 입력가능 합니다. 2.교대 날개벽 제원입력에서 해당날개벽에서 권고안을 실행하면 기초에서 이탈되지 않도로 셋팅이 됩니다. 3.보내주신화일은 일단 선형참조가 수동으로 되어있읍니다. 사용자가 횡단구성입력에서 넣은 간격은 지점각도입력-교량받침좌표편집-수정한 교량받침좌표가 on이 되어있는경우에는 의미가 없어지면 수정한 교량받침좌표을 기준으로 다시 직거리로 산출하기 때문에 반올림등의 이유로 차이가 날 수 있읍니다. 감사합니다.
Follow-up2006-11-10 14:48
>>안녕하세요. 한길아이티입니다. 1.코핑부 주철근에 직각으로 들어가는 철근은 사용자가 입력가능 합니다. 2.교대 날개벽 제원입력에서 해당날개벽에서 권고안을 실행하면 기초에서 이탈되지 않도로 셋팅이 됩니다. 3.보내주신화일은 일단 선형참조가 수동으로 되어있읍니다. 사용자가 횡단구성입력에서 넣은 간격은 지점각도입력-교량받침좌표편집-수정한 교량받침좌표가 on이 되어있는경우에는 의미가 없어지면 수정한 교량받침좌표을 기준으로 다시 직거리로 산출하기 때문에 반올림등의 이유로 차이가 날 수 있읍니다. 감사합니다.
More in this list
| Status | Product | No. | Title | Views | Date |
|---|---|---|---|---|---|
| Answered | AAbutPier | #268560 | Question about the calculation report | 180 | 2026-09-29 |
| Answered | AAbutPier | #268548 | Tendon force when placing tendons in the pier cap | 218 | 2026-09-29 |
| Answered | AAbutPier | #268520 | Pier seismic check | 248 | 2026-09-23 |
| Answered | AAbutPier | #268509 | Transverse reinforcement factor, K | 192 | 2026-09-22 |
| Answered | AAbutPier | #268492 | Girder positions in slab dimensions | 335 | 2026-09-21 |
| Answered | AAbutPier | #268483 | Transverse pile member forces are "0" in pier pile foundation check | 198 | 2026-09-21 |
| Answered | AAbutPier | #268482 | Top and bottom rebar detailing error in pier foundation STM | 216 | 2026-09-21 |
| Answered | AAbutPier | #268476 | Question about slab dimensions | 306 | 2026-09-19 |
| Answered | AAbutPier | #268470 | Settlement and bearing capacity | 269 | 2026-09-18 |
| Answered | AAbutPier | #268462 | Superstructure wind load in the calculation report | 191 | 2026-09-18 |
| Answered | AAbutPier | #268451 | Changing bearing location | 87 | 2026-09-18 |
| Answered | AAbutPier | #268445 | Main rebar placement | 271 | 2026-09-17 |
| Answered | AAbutPier | #268438 | Modeling error in seismic analysis | 404 | 2026-09-17 |
| Answered | AAbutPier | #268433 | Pier alignment center | 186 | 2026-09-17 |
| Answered | AAbutPier | #268431 | Please check the design ground surface displacement | 230 | 2026-09-17 |
| Answered | AAbutPier | #268422 | Question about pier | 253 | 2026-09-17 |
| Answered | AAbutPier | #268416 | Wprov calculation in the structural calculation report | 245 | 2026-09-17 |
| Answered | AAbutPier | #268402 | Increasing the number of column main rebars | 391 | 2026-09-16 |
| Answered | AAbutPier | #268392 | Question about cast-in-place piles | 222 | 2026-09-16 |
| Answered | AAbutPier | #268387 | Error when entering reinforcing rebar | 175 | 2026-09-16 |