Please check the coordinate file
좌표를 평행식으로 배치하고 싶습니다 방호벽 끝단이 양쪽이 똑같게 입력 했는데 상행선의 끝단과 하행선의 끝단이 치수가 차이가 나는데 같게 할수 없는지 빔배치는 선형과 관계없이 평행식으로 배치할려고 하는데 방법을 알고 싶습니다 빠른 답변부탁드립니다... 수고 하세요!!!!
안녕하세요. 한길아이티입니다. 보내주신 화일을 검토한 결과는 다음과 같읍니다. 1.거더자동배치-교량받침좌표-수정한 교량받침좌표에 on이 되어있으므로 횡단구성입력과 상이하게 사용 자가 입력한 좌표로 셋팅이 되게 됩니다. 이런경우 횡단구성을 바꾸더라도 좌표는 변경되지 않읍니다. 참고 로 거더자동배치를 한경우에는 프로그램내에서 좌표값을 프로그램내에서 사용자가 선택한 옵션에 따라 자 동으로 셋팅이 되기때문에 수정한 교량받침좌표에 on이 됩니다. 2.평행식을 배치를 원할경우 교량길이,지점각도가 같이 수정됩니다. 방법은 다음과 같읍니다. 거더자동배치에서 거더정보상세입력중 사용자가 원하는 옵션을 선택후 만약 A2를 기준으로 평행배치을 원 할경우 기준지점:A2,거더평행배치을 ON하고 거더간격입력은 보내주신화일에서는 2550mm이므로 이수치 를 입력후 최적간격배치를 누르시면 A2를 기준을 평행배치된것을 확인하실 수 있읍니다. 거더정보상세입력에 대한 옵션사항은 메뉴얼을 참조하시기 바랍니다. 감사합니다.
Follow-up2006-11-07 11:19
평행식 배치를 가르쳐 주신 방법으로 하였는데 빔배치도가 케드에서 만든것 하고 빔위치가 차이가 있는데 이유가 무엇인지 궁금합니다 수고 하세요!!!!
Follow-up2006-11-07 14:26
파일 [이름]...
안녕하세요. 한길아이티입니다. 기준위치가 되어있는 A2의 횡단구성입력이 슬래브 일반도와 상이합니다. 슬래브 일반도에 나와있는 수치에 맞게 입력하여주세요. 감사합니다.
More in this list
| Status | Product | No. | Title | Views | Date |
|---|---|---|---|---|---|
| Answered | AAbutPier | #268560 | Question about the calculation report | 180 | 2026-09-29 |
| Answered | AAbutPier | #268548 | Tendon force when placing tendons in the pier cap | 218 | 2026-09-29 |
| Answered | AAbutPier | #268520 | Pier seismic check | 248 | 2026-09-23 |
| Answered | AAbutPier | #268509 | Transverse reinforcement factor, K | 192 | 2026-09-22 |
| Answered | AAbutPier | #268492 | Girder positions in slab dimensions | 335 | 2026-09-21 |
| Answered | AAbutPier | #268483 | Transverse pile member forces are "0" in pier pile foundation check | 198 | 2026-09-21 |
| Answered | AAbutPier | #268482 | Top and bottom rebar detailing error in pier foundation STM | 216 | 2026-09-21 |
| Answered | AAbutPier | #268476 | Question about slab dimensions | 306 | 2026-09-19 |
| Answered | AAbutPier | #268470 | Settlement and bearing capacity | 269 | 2026-09-18 |
| Answered | AAbutPier | #268462 | Superstructure wind load in the calculation report | 191 | 2026-09-18 |
| Answered | AAbutPier | #268451 | Changing bearing location | 87 | 2026-09-18 |
| Answered | AAbutPier | #268445 | Main rebar placement | 273 | 2026-09-17 |
| Answered | AAbutPier | #268438 | Modeling error in seismic analysis | 404 | 2026-09-17 |
| Answered | AAbutPier | #268433 | Pier alignment center | 186 | 2026-09-17 |
| Answered | AAbutPier | #268431 | Please check the design ground surface displacement | 230 | 2026-09-17 |
| Answered | AAbutPier | #268422 | Question about pier | 253 | 2026-09-17 |
| Answered | AAbutPier | #268416 | Wprov calculation in the structural calculation report | 245 | 2026-09-17 |
| Answered | AAbutPier | #268402 | Increasing the number of column main rebars | 391 | 2026-09-16 |
| Answered | AAbutPier | #268392 | Question about cast-in-place piles | 222 | 2026-09-16 |
| Answered | AAbutPier | #268387 | Error when entering reinforcing rebar | 175 | 2026-09-16 |