Skip to content
AnsweredAAbutPierQ&A #2007642006-10-25 21:40 · Views 32

Shoe EL looks wrong

교좌받침 슈의 EL 이상하게 나옵니다. 검토 부탁드립니다. 시점부 교대의 센터에서 왼쪽 첫번째 슈의 EL의 경우 8.251-1.5/2*0.02(횡방향)-0.5*0.003(종방향)-0.04(포장)-0.3(바닥판)-0.7(빔)-0.4(받침부형하공간)+0.25(받침블록높이)=7.0445가 나옵니다. APIER상에서는 7.041가 나오는데 차이가 있습니다. 답변 부탁드립니다.(횡단구배 -0.2%,종단 구배는 -0.3%입니다)

Answer2006-10-25 13:35

안녕하세요. 한길아이티입니다. 교량받침중심이므로 바닥판두께가 0.3이 아니라 0.303입니다. 자세한 부분은 도면의 EL산출근거도를 확인하시면 됩니다. 감사합니다.

Follow-up2006-10-25 15:24

수고 하십니다. APIER를 보시면 슬래브 제원입력을 300mm로 입력하였습니다. 어떻게 하여 303으로 계산되는지 확인 부탁합니다. >>안녕하세요. 한길아이티입니다. 교량받침중심이므로 바닥판두께가 0.3이 아니라 0.303입니다. 자세한 부분은 도면의 EL산출근거도를 확인하시면 됩니다. 감사합니다.

Answer2006-10-25 15:44

안녕하세요. 한길아이티입니다. 300을 입력한것은 맞지만 기준위치가 거더상부폭끝단입니다. 따라서 슈위치는 상부폭원중간에 있으므로 다음과 같이 됩니다. 300+3(=300/2*0.02)=303 감사합니다.

More in this list

StatusProductNo.TitleViewsDate
AnsweredAAbutPier#268560Question about the calculation report1802026-09-29
AnsweredAAbutPier#268548Tendon force when placing tendons in the pier cap2182026-09-29
AnsweredAAbutPier#268520Pier seismic check2482026-09-23
AnsweredAAbutPier#268509Transverse reinforcement factor, K1922026-09-22
AnsweredAAbutPier#268492Girder positions in slab dimensions3352026-09-21
AnsweredAAbutPier#268483Transverse pile member forces are "0" in pier pile foundation check1982026-09-21
AnsweredAAbutPier#268482Top and bottom rebar detailing error in pier foundation STM2162026-09-21
AnsweredAAbutPier#268476Question about slab dimensions3062026-09-19
AnsweredAAbutPier#268470Settlement and bearing capacity2692026-09-18
AnsweredAAbutPier#268462Superstructure wind load in the calculation report1912026-09-18
AnsweredAAbutPier#268451Changing bearing location872026-09-18
AnsweredAAbutPier#268445Main rebar placement2752026-09-17
AnsweredAAbutPier#268438Modeling error in seismic analysis4042026-09-17
AnsweredAAbutPier#268433Pier alignment center1862026-09-17
AnsweredAAbutPier#268431Please check the design ground surface displacement2302026-09-17
AnsweredAAbutPier#268422Question about pier2532026-09-17
AnsweredAAbutPier#268416Wprov calculation in the structural calculation report2452026-09-17
AnsweredAAbutPier#268402Increasing the number of column main rebars3912026-09-16
AnsweredAAbutPier#268392Question about cast-in-place piles2222026-09-16
AnsweredAAbutPier#268387Error when entering reinforcing rebar1752026-09-16
Sign in to ask