Skip to content
AnsweredAAbutPierQ&A #2006332006-10-17 11:08 · Views 34

Question about rebar arrangement in cast-in-place piles

현장타설말뚝 철근 배치시 R4의 철근의 종류가 궁금하고, 또 도로교설계기준 하부구조 5.8.12.3의 (4)항의 철근량을 측단면적의 0.2%이상으로 하라고 되어 있는데 이때의 규정을 꼭 지켜야 하는지가 궁금합니다. 또 십자 철근의 배치간격은 권고안으로 하였을 경우 600이 나오는데 이때 띠철근의 CTC를 따라 가야 되지 않나 싶습니다.

Answer

안녕하세요. 한길아이티입니다. R4는 철근올음방지철근입니다. 측단면적에 대한 규정은 사용자가 판단하셔서 설정을 하셔야 합니다. 권고안은 프로그램상의 초기화를 뜻하는것이지 강제성은 없으면 사용자가 십자철근은 배치간격 수동입력 하여 수정하실 수 있읍니다. 감사합니다.

More in this list

StatusProductNo.TitleViewsDate
AnsweredAAbutPier#268560Question about the calculation report1802026-09-29
AnsweredAAbutPier#268548Tendon force when placing tendons in the pier cap2182026-09-29
AnsweredAAbutPier#268520Pier seismic check2482026-09-23
AnsweredAAbutPier#268509Transverse reinforcement factor, K1922026-09-22
AnsweredAAbutPier#268492Girder positions in slab dimensions3352026-09-21
AnsweredAAbutPier#268483Transverse pile member forces are "0" in pier pile foundation check1982026-09-21
AnsweredAAbutPier#268482Top and bottom rebar detailing error in pier foundation STM2162026-09-21
AnsweredAAbutPier#268476Question about slab dimensions3062026-09-19
AnsweredAAbutPier#268470Settlement and bearing capacity2692026-09-18
AnsweredAAbutPier#268462Superstructure wind load in the calculation report1912026-09-18
AnsweredAAbutPier#268451Changing bearing location872026-09-18
AnsweredAAbutPier#268445Main rebar placement2752026-09-17
AnsweredAAbutPier#268438Modeling error in seismic analysis4042026-09-17
AnsweredAAbutPier#268433Pier alignment center1862026-09-17
AnsweredAAbutPier#268431Please check the design ground surface displacement2312026-09-17
AnsweredAAbutPier#268422Question about pier2542026-09-17
AnsweredAAbutPier#268416Wprov calculation in the structural calculation report2452026-09-17
AnsweredAAbutPier#268402Increasing the number of column main rebars3912026-09-16
AnsweredAAbutPier#268392Question about cast-in-place piles2222026-09-16
AnsweredAAbutPier#268387Error when entering reinforcing rebar1752026-09-16
Sign in to ask