Skip to content
AnsweredAAbutPierQ&A #2003022006-09-21 20:17 · Views 30

Modeling looks wrong in seismic analysis

P2교각 하단부에 스프링 계수가 -값이 나오더군요 SAP자동 실행하니까 그렇게 모델링이 되던데.... 지질주상도 때문에 그런가요?(정확한 지질주상도가 아니라서....)

Answer

안녕하세요. 한길아이티입니다. P2교각 기초부 설정입력에서 말뚝직경에 비해 말뚝길이가 너무 작기때문에 KV산정식에 들어가는 a값은 다음식에 근거하여 산출됩니다. a=0.031(L/D)-0.15 하지만 이식은 도로교시방서(1996) P.698에 의하면 L/D>10이상을 권장하고 있읍니다. 따라서 말뚝길이를 조정하시거나 따로 KV값을 산출하셔서 사용자가 입력을 하셔야 합니다. 감사합니다.

More in this list

StatusProductNo.TitleViewsDate
AnsweredAAbutPier#268560Question about the calculation report1802026-09-29
AnsweredAAbutPier#268548Tendon force when placing tendons in the pier cap2182026-09-29
AnsweredAAbutPier#268520Pier seismic check2482026-09-23
AnsweredAAbutPier#268509Transverse reinforcement factor, K1922026-09-22
AnsweredAAbutPier#268492Girder positions in slab dimensions3352026-09-21
AnsweredAAbutPier#268483Transverse pile member forces are "0" in pier pile foundation check1982026-09-21
AnsweredAAbutPier#268482Top and bottom rebar detailing error in pier foundation STM2162026-09-21
AnsweredAAbutPier#268476Question about slab dimensions3062026-09-19
AnsweredAAbutPier#268470Settlement and bearing capacity2692026-09-18
AnsweredAAbutPier#268462Superstructure wind load in the calculation report1912026-09-18
AnsweredAAbutPier#268451Changing bearing location872026-09-18
AnsweredAAbutPier#268445Main rebar placement2752026-09-17
AnsweredAAbutPier#268438Modeling error in seismic analysis4042026-09-17
AnsweredAAbutPier#268433Pier alignment center1862026-09-17
AnsweredAAbutPier#268431Please check the design ground surface displacement2312026-09-17
AnsweredAAbutPier#268422Question about pier2552026-09-17
AnsweredAAbutPier#268416Wprov calculation in the structural calculation report2452026-09-17
AnsweredAAbutPier#268402Increasing the number of column main rebars3912026-09-16
AnsweredAAbutPier#268392Question about cast-in-place piles2222026-09-16
AnsweredAAbutPier#268387Error when entering reinforcing rebar1752026-09-16
Sign in to ask