Skip to content
AnsweredAAbutPierQ&A #2002822006-09-21 00:51 · Views 40

Bearing EL

수고하십니다 말씀대로 선형자동참조를 하였는데요 수동으로 하였을때는 선형방향 시점측 교대만 EL 값이 맞았으나 자동으로 하고 나선 선형반대방향 종점측 교대도 EL 값이 나옵니다 그런데 선형방향 종점측 교대와 선형반대방향 종점측 교대는 값이 좀 상이합니다 그리고 한가지만 더 검토 부탁드립니다. 교량 EL 산출근거 도면에는 종점측 교대의 자료가 나오지 않는데요 검토 부탁드립니다. 참고로 선형방향 종점측 교대 슈 EL= 13.779 , 13.718 선형반대방향 시점측 교대 슈 EL = 14.038, 13.971 이 나와야 합니다

Answer

안녕하세요. 한길아이티입니다. 전화로 말씀드렸읍니다. 감사합니다.

More in this list

StatusProductNo.TitleViewsDate
AnsweredAAbutPier#268560Question about the calculation report1802026-09-29
AnsweredAAbutPier#268548Tendon force when placing tendons in the pier cap2182026-09-29
AnsweredAAbutPier#268520Pier seismic check2482026-09-23
AnsweredAAbutPier#268509Transverse reinforcement factor, K1922026-09-22
AnsweredAAbutPier#268492Girder positions in slab dimensions3352026-09-21
AnsweredAAbutPier#268483Transverse pile member forces are "0" in pier pile foundation check1982026-09-21
AnsweredAAbutPier#268482Top and bottom rebar detailing error in pier foundation STM2162026-09-21
AnsweredAAbutPier#268476Question about slab dimensions3062026-09-19
AnsweredAAbutPier#268470Settlement and bearing capacity2692026-09-18
AnsweredAAbutPier#268462Superstructure wind load in the calculation report1912026-09-18
AnsweredAAbutPier#268451Changing bearing location872026-09-18
AnsweredAAbutPier#268445Main rebar placement2752026-09-17
AnsweredAAbutPier#268438Modeling error in seismic analysis4042026-09-17
AnsweredAAbutPier#268433Pier alignment center1862026-09-17
AnsweredAAbutPier#268431Please check the design ground surface displacement2312026-09-17
AnsweredAAbutPier#268422Question about pier2552026-09-17
AnsweredAAbutPier#268416Wprov calculation in the structural calculation report2452026-09-17
AnsweredAAbutPier#268402Increasing the number of column main rebars3912026-09-16
AnsweredAAbutPier#268392Question about cast-in-place piles2222026-09-16
AnsweredAAbutPier#268387Error when entering reinforcing rebar1752026-09-16
Sign in to ask