EL mismatch
일반도와 el 산출근거의 교좌 높이가 서로 상이 합니다. 교각 일반도 상의 전열과 후열의 bed block 이 합쳐진 것과 분리 된것이 존재하고 el은 전부 400기준으로 생성 된것 같고 교각은 전열400+@ 후열 400 개념과 (베드블럭 합쳐짐) 전열 후열 모두 400 개념이 섞여 있음 ( 베드블럭 분리 ) 베드 블럭을 합치고 교각은 전열400+@ 후열 400 으로 하려고 하는데 어찌 되어야 할지.. 어느것을 조정 하여야 하는지 문의 드립니다. [개인정보]
Answer
안녕하세요. 한길아이티입니다. 보내주신화일에서 전열후열이 차이가 난것은 교량받침EL산출근거도와 교각일반도에 산출하는것과 상이한 점이 있기때문에 그렇게 나온것입니다. 교각일반도에서는 슬래브제원입력-교좌면형하공간의 수치를 사용 하여 코핑상단면부터 계산이 되는것이고 전열이 기준이 되서 형하공간값으로 설정되는것입니다. 그화일에서 교량받침콘크리트를 분리하고자할때는 지점별로 형하공간값을 산정하여 입력하셔야합니다. 참고로 교량받침콘크리트를 일체화하면 자동으로 계산됩니다. 추가로 질문하신 내용중 말뚝길이가 변하는경우는 지반정보입력에서 말뚝지반 자동설정을 클릭한경우 말 뚝길이가 자동으로 변합니다. 감사합니다.
More in this list
| Status | Product | No. | Title | Views | Date |
|---|---|---|---|---|---|
| Answered | AAbutPier | #268560 | Question about the calculation report | 180 | 2026-09-29 |
| Answered | AAbutPier | #268548 | Tendon force when placing tendons in the pier cap | 218 | 2026-09-29 |
| Answered | AAbutPier | #268520 | Pier seismic check | 248 | 2026-09-23 |
| Answered | AAbutPier | #268509 | Transverse reinforcement factor, K | 192 | 2026-09-22 |
| Answered | AAbutPier | #268492 | Girder positions in slab dimensions | 335 | 2026-09-21 |
| Answered | AAbutPier | #268483 | Transverse pile member forces are "0" in pier pile foundation check | 198 | 2026-09-21 |
| Answered | AAbutPier | #268482 | Top and bottom rebar detailing error in pier foundation STM | 216 | 2026-09-21 |
| Answered | AAbutPier | #268476 | Question about slab dimensions | 306 | 2026-09-19 |
| Answered | AAbutPier | #268470 | Settlement and bearing capacity | 269 | 2026-09-18 |
| Answered | AAbutPier | #268462 | Superstructure wind load in the calculation report | 191 | 2026-09-18 |
| Answered | AAbutPier | #268451 | Changing bearing location | 87 | 2026-09-18 |
| Answered | AAbutPier | #268445 | Main rebar placement | 276 | 2026-09-17 |
| Answered | AAbutPier | #268438 | Modeling error in seismic analysis | 404 | 2026-09-17 |
| Answered | AAbutPier | #268433 | Pier alignment center | 186 | 2026-09-17 |
| Answered | AAbutPier | #268431 | Please check the design ground surface displacement | 231 | 2026-09-17 |
| Answered | AAbutPier | #268422 | Question about pier | 256 | 2026-09-17 |
| Answered | AAbutPier | #268416 | Wprov calculation in the structural calculation report | 246 | 2026-09-17 |
| Answered | AAbutPier | #268402 | Increasing the number of column main rebars | 391 | 2026-09-16 |
| Answered | AAbutPier | #268392 | Question about cast-in-place piles | 222 | 2026-09-16 |
| Answered | AAbutPier | #268387 | Error when entering reinforcing rebar | 175 | 2026-09-16 |