Skip to content
AnsweredAAbutPierQ&A #1997122006-08-21 14:13 · Views 193

When checking piles

PHC말뚝에서 허용 휨압축응력과 허용 휨인장응력 및 허용 전단응력 값이 나온 근거를 알고 싶습니다.. 그리고 전단응력 검토시 전단형상계수를 곱하는 이유를 알고 싶습니다.. 마지막으로 선굴착후 시공된 말뚝의 이음의 경우 허용하중 감소율을 1/2로 사용하면 된다는데(도로교설계기준 (하부구조) 2001 P.223 참조), 내부굴착 말뚝시 그대로 사용하시는 것 같은데......검토바랍니다..

Answer

안녕하세요. 한길아이티입니다. 전화로 답변드렸읍니다. 감사합니다.

More in this list

StatusProductNo.TitleViewsDate
AnsweredAAbutPier#268560Question about the calculation report1802026-09-29
AnsweredAAbutPier#268548Tendon force when placing tendons in the pier cap2182026-09-29
AnsweredAAbutPier#268520Pier seismic check2482026-09-23
AnsweredAAbutPier#268509Transverse reinforcement factor, K1922026-09-22
AnsweredAAbutPier#268492Girder positions in slab dimensions3352026-09-21
AnsweredAAbutPier#268483Transverse pile member forces are "0" in pier pile foundation check1982026-09-21
AnsweredAAbutPier#268482Top and bottom rebar detailing error in pier foundation STM2162026-09-21
AnsweredAAbutPier#268476Question about slab dimensions3062026-09-19
AnsweredAAbutPier#268470Settlement and bearing capacity2692026-09-18
AnsweredAAbutPier#268462Superstructure wind load in the calculation report1912026-09-18
AnsweredAAbutPier#268451Changing bearing location872026-09-18
AnsweredAAbutPier#268445Main rebar placement2782026-09-17
AnsweredAAbutPier#268438Modeling error in seismic analysis4042026-09-17
AnsweredAAbutPier#268433Pier alignment center1862026-09-17
AnsweredAAbutPier#268431Please check the design ground surface displacement2322026-09-17
AnsweredAAbutPier#268422Question about pier2592026-09-17
AnsweredAAbutPier#268416Wprov calculation in the structural calculation report2462026-09-17
AnsweredAAbutPier#268402Increasing the number of column main rebars3912026-09-16
AnsweredAAbutPier#268392Question about cast-in-place piles2222026-09-16
AnsweredAAbutPier#268387Error when entering reinforcing rebar1752026-09-16
Sign in to ask