Skip to content
AnsweredAAbutPierQ&A #1990772006-06-23 23:20 · Views 42

Follow-up to my phone call (water flow pressure)

수심(H)와 작용위치(0.6H)의 값 좀 봐주세요..

Answer

안녕하세요. 한길아이티입니다. 교각3(평택)의 입력값으로 확인을 하였으며 결과는 다음과 같습니다. H.W.L = 63.420, 지반고 = 56.557, 기초상단 EL = 51.374 유수압의 작용위치는 하저면에서 0.6H의 위치이므로 , 56.557 + (63.420-56.557) x 0.6 = 60.675 입니다. 기초상단을 기준으로 하면 60.567 - 51.374 => 9.301m 입니다. <> 수심(H)와 작용위치(0.6H)의 값 좀 봐주세요..

More in this list

StatusProductNo.TitleViewsDate
AnsweredAAbutPier#268560Question about the calculation report1802026-09-29
AnsweredAAbutPier#268548Tendon force when placing tendons in the pier cap2182026-09-29
AnsweredAAbutPier#268520Pier seismic check2482026-09-23
AnsweredAAbutPier#268509Transverse reinforcement factor, K1922026-09-22
AnsweredAAbutPier#268492Girder positions in slab dimensions3352026-09-21
AnsweredAAbutPier#268483Transverse pile member forces are "0" in pier pile foundation check1982026-09-21
AnsweredAAbutPier#268482Top and bottom rebar detailing error in pier foundation STM2162026-09-21
AnsweredAAbutPier#268476Question about slab dimensions3062026-09-19
AnsweredAAbutPier#268470Settlement and bearing capacity2692026-09-18
AnsweredAAbutPier#268462Superstructure wind load in the calculation report1912026-09-18
AnsweredAAbutPier#268451Changing bearing location872026-09-18
AnsweredAAbutPier#268445Main rebar placement2802026-09-17
AnsweredAAbutPier#268438Modeling error in seismic analysis4042026-09-17
AnsweredAAbutPier#268433Pier alignment center1862026-09-17
AnsweredAAbutPier#268431Please check the design ground surface displacement2332026-09-17
AnsweredAAbutPier#268422Question about pier2602026-09-17
AnsweredAAbutPier#268416Wprov calculation in the structural calculation report2462026-09-17
AnsweredAAbutPier#268402Increasing the number of column main rebars3912026-09-16
AnsweredAAbutPier#268392Question about cast-in-place piles2222026-09-16
AnsweredAAbutPier#268387Error when entering reinforcing rebar1752026-09-16
Sign in to ask