Skip to content
AnsweredAAbutPierQ&A #1990212006-06-21 00:07 · Views 20

Under-girder clearance at the bearing seat

거더분리가 없으며 교좌면 형하공간을 임의의 값으로 넣으면 설계환경에서 전열에는 입력값, 후열에는 400mm고정값으로 표현되는데요.. 이때 온도 수평력에 의한 모멘트 산정시 팔길이가 400mm의 고정값으로 나오는 것 같습니다. 임의의 값을 넣으면 그 값으로 계산되어져야 할 것 같거든요.

Answer2006-06-20 16:02

안녕하세요. 한길아이티입니다. 말씀하신 사항을 확인하지 못하였습니다. 입력하신 자료와 출력물을 첨부하여 주시면 재검토후 답변드리겠습니다. 감사합니다.

Follow-up2006-06-20 16:54

검토부탁할께요.

Answer2006-06-20 17:41

안녕하세요. 한길아이티입니다. 말씀하신 사항은 확인하였습니다. 계산은 입력값으로 적용이 되었으나 출력부분에 오류가 있었습니다. 수정하였으며 금일자 패치에 적용하도록 하겠습니다. 감사합니다.

Attachments on this post were deleted after the retention period (3 years after the last answer) and can no longer be downloaded. If you need the same material, please contact us.

More in this list

StatusProductNo.TitleViewsDate
AnsweredAAbutPier#268560Question about the calculation report1802026-09-29
AnsweredAAbutPier#268548Tendon force when placing tendons in the pier cap2182026-09-29
AnsweredAAbutPier#268520Pier seismic check2482026-09-23
AnsweredAAbutPier#268509Transverse reinforcement factor, K1922026-09-22
AnsweredAAbutPier#268492Girder positions in slab dimensions3352026-09-21
AnsweredAAbutPier#268483Transverse pile member forces are "0" in pier pile foundation check1982026-09-21
AnsweredAAbutPier#268482Top and bottom rebar detailing error in pier foundation STM2162026-09-21
AnsweredAAbutPier#268476Question about slab dimensions3062026-09-19
AnsweredAAbutPier#268470Settlement and bearing capacity2692026-09-18
AnsweredAAbutPier#268462Superstructure wind load in the calculation report1912026-09-18
AnsweredAAbutPier#268451Changing bearing location872026-09-18
AnsweredAAbutPier#268445Main rebar placement2802026-09-17
AnsweredAAbutPier#268438Modeling error in seismic analysis4042026-09-17
AnsweredAAbutPier#268433Pier alignment center1862026-09-17
AnsweredAAbutPier#268431Please check the design ground surface displacement2332026-09-17
AnsweredAAbutPier#268422Question about pier2602026-09-17
AnsweredAAbutPier#268416Wprov calculation in the structural calculation report2462026-09-17
AnsweredAAbutPier#268402Increasing the number of column main rebars3912026-09-16
AnsweredAAbutPier#268392Question about cast-in-place piles2222026-09-16
AnsweredAAbutPier#268387Error when entering reinforcing rebar1752026-09-16
Sign in to ask