Skip to content
AnsweredAAbutPierQ&A #1983572006-04-07 19:20 · Views 52

Seismic design

수고하세요 교대_교각 - 고정하중및 활하중 값만 수정되었습니다.

Answer

안녕하세요. 한길아이티입니다. [일반입력>내진해석가로보설정]에서 가로보 단면타입수를 "1"로 입력하시고 모델링에는 세가지(1,2,3)를 적용하여 생긴 오류입니다. [일반입력>내진해석가로보설정]에서 가로보 단면타입수를 "3"로 변경하시고 해석을 진행하시면 정상적으로 실행됩니다. 또 한가지 P1에 가로보 위치가 교좌면과 일치하지 않습니다.[내진해석 모델]에서 확인해 보시고 적절하게 변경하여 작업하시기 바랍니다. 감사합니다.

More in this list

StatusProductNo.TitleViewsDate
AnsweredAAbutPier#268560Question about the calculation report1802026-09-29
AnsweredAAbutPier#268548Tendon force when placing tendons in the pier cap2182026-09-29
AnsweredAAbutPier#268520Pier seismic check2482026-09-23
AnsweredAAbutPier#268509Transverse reinforcement factor, K1922026-09-22
AnsweredAAbutPier#268492Girder positions in slab dimensions3352026-09-21
AnsweredAAbutPier#268483Transverse pile member forces are "0" in pier pile foundation check1982026-09-21
AnsweredAAbutPier#268482Top and bottom rebar detailing error in pier foundation STM2162026-09-21
AnsweredAAbutPier#268476Question about slab dimensions3062026-09-19
AnsweredAAbutPier#268470Settlement and bearing capacity2692026-09-18
AnsweredAAbutPier#268462Superstructure wind load in the calculation report1912026-09-18
AnsweredAAbutPier#268451Changing bearing location872026-09-18
AnsweredAAbutPier#268445Main rebar placement2842026-09-17
AnsweredAAbutPier#268438Modeling error in seismic analysis4042026-09-17
AnsweredAAbutPier#268433Pier alignment center1862026-09-17
AnsweredAAbutPier#268431Please check the design ground surface displacement2342026-09-17
AnsweredAAbutPier#268422Question about pier2612026-09-17
AnsweredAAbutPier#268416Wprov calculation in the structural calculation report2492026-09-17
AnsweredAAbutPier#268402Increasing the number of column main rebars3912026-09-16
AnsweredAAbutPier#268392Question about cast-in-place piles2222026-09-16
AnsweredAAbutPier#268387Error when entering reinforcing rebar1752026-09-16
Sign in to ask