Skip to content
AnsweredAAbutPierQ&A #1982722006-03-31 14:37 · Views 97

Quantity calculation report

* 수량산출서에서 철근인상작업 (H=30m미만, H=30m이상 ton으로 산출)이 추가가 되어야 할것 같네요..

Answer2006-04-03 10:06

안녕하세요. 한길아이티입니다. 사무실 이전관계로 답변이 늦어 죄송합니다. 철근인상에 대한 부분은 적용 기준에 대한 사항이 명확하지 않습니다. 기존에도 타 업체에서 요청한 바가 있으나 적용기준에 대한 자료부족으로 적용을 하지 못하였습니다. 적용여부를 판단하기 위해서는 산출에 대한 기준자료가 필요합니다. 자료를 첨부하여 주시면 적용여부에 대한 답변을 드리도록 하겠습니다. 감사합니다.

Follow-up2006-04-04 08:27

* 수량산출서에서 철근인상작업 (H=30m미만, H=30m이상 ton으로 산출)이 추가가 되어야 할것 같네요.. ---수량산출기준---- 2005년 건교부 설계기준 > 4.구조물공 > 4.03 수량산출요령 > 3. 하부구조 > 마. 철근가공조립 > 3) 철근인상작업 에 명기 되어 있습니다....

Attachments on this post were deleted after the retention period (3 years after the last answer) and can no longer be downloaded. If you need the same material, please contact us.

More in this list

StatusProductNo.TitleViewsDate
AnsweredAAbutPier#268560Question about the calculation report1802026-09-29
AnsweredAAbutPier#268548Tendon force when placing tendons in the pier cap2182026-09-29
AnsweredAAbutPier#268520Pier seismic check2482026-09-23
AnsweredAAbutPier#268509Transverse reinforcement factor, K1922026-09-22
AnsweredAAbutPier#268492Girder positions in slab dimensions3352026-09-21
AnsweredAAbutPier#268483Transverse pile member forces are "0" in pier pile foundation check1982026-09-21
AnsweredAAbutPier#268482Top and bottom rebar detailing error in pier foundation STM2162026-09-21
AnsweredAAbutPier#268476Question about slab dimensions3062026-09-19
AnsweredAAbutPier#268470Settlement and bearing capacity2692026-09-18
AnsweredAAbutPier#268462Superstructure wind load in the calculation report1912026-09-18
AnsweredAAbutPier#268451Changing bearing location872026-09-18
AnsweredAAbutPier#268445Main rebar placement2842026-09-17
AnsweredAAbutPier#268438Modeling error in seismic analysis4042026-09-17
AnsweredAAbutPier#268433Pier alignment center1862026-09-17
AnsweredAAbutPier#268431Please check the design ground surface displacement2342026-09-17
AnsweredAAbutPier#268422Question about pier2612026-09-17
AnsweredAAbutPier#268416Wprov calculation in the structural calculation report2492026-09-17
AnsweredAAbutPier#268402Increasing the number of column main rebars3912026-09-16
AnsweredAAbutPier#268392Question about cast-in-place piles2222026-09-16
AnsweredAAbutPier#268387Error when entering reinforcing rebar1752026-09-16
Sign in to ask