Skip to content
AnsweredAAbutPierQ&A #1982152006-03-27 18:23 · Views 88

About temperature load calculation

교각의 온도하중계산에서 슈 고정점으로부터의 거리를 입력하는 문제입니다. 3. 하중계산 중 4) 온도하중계산에서 L값이 0으로 나오는데 설계환경설정란에서 값을 입력하여도 적용을 누르면 0으로 되돌아 갑니다. 참고로 Pier2의 고정점으로부터의 거리는 33.9395m 입니다

Answer

안녕하세요. 한길아이티입니다. Pier2의 경우 좌우측 지점부에 고정단이 있어서 거리가 서로 상쇄가 되어 "0"이 적용됩니다. 임의로 거리를 입력하시려면 [교각입력]-[설계환경]에서 "고정단거리 입력"을 체크하신 후에 입력을 하시면 됩니다. 감사합니다.

More in this list

StatusProductNo.TitleViewsDate
AnsweredAAbutPier#268560Question about the calculation report1802026-09-29
AnsweredAAbutPier#268548Tendon force when placing tendons in the pier cap2182026-09-29
AnsweredAAbutPier#268520Pier seismic check2482026-09-23
AnsweredAAbutPier#268509Transverse reinforcement factor, K1922026-09-22
AnsweredAAbutPier#268492Girder positions in slab dimensions3352026-09-21
AnsweredAAbutPier#268483Transverse pile member forces are "0" in pier pile foundation check1982026-09-21
AnsweredAAbutPier#268482Top and bottom rebar detailing error in pier foundation STM2162026-09-21
AnsweredAAbutPier#268476Question about slab dimensions3062026-09-19
AnsweredAAbutPier#268470Settlement and bearing capacity2692026-09-18
AnsweredAAbutPier#268462Superstructure wind load in the calculation report1912026-09-18
AnsweredAAbutPier#268451Changing bearing location872026-09-18
AnsweredAAbutPier#268445Main rebar placement2842026-09-17
AnsweredAAbutPier#268438Modeling error in seismic analysis4042026-09-17
AnsweredAAbutPier#268433Pier alignment center1862026-09-17
AnsweredAAbutPier#268431Please check the design ground surface displacement2342026-09-17
AnsweredAAbutPier#268422Question about pier2612026-09-17
AnsweredAAbutPier#268416Wprov calculation in the structural calculation report2492026-09-17
AnsweredAAbutPier#268402Increasing the number of column main rebars3912026-09-16
AnsweredAAbutPier#268392Question about cast-in-place piles2222026-09-16
AnsweredAAbutPier#268387Error when entering reinforcing rebar1752026-09-16
Sign in to ask