Skip to content
AnsweredAAbutPierQ&A #1975802006-02-08 17:23 · Views 11

Applying one layer instead of two for reinforcing bars under bridge bearings

교량받침 하면 보강철근은 2단으로 해야하는건가요 1단으로 적용하려는데 간격을 0 으로 적용하고 갯수는 변함없이 2단으로 나오는거 갔던데

Answer

안녕하세요. 한길아이티입니다. 교량받침 하면 보강철근을 1단으로 배치하시려면 입력값중 "D2"값을 "0"으로 입력하시면 됩니다. ( [교대입력],[교각입력]-[교좌면 배근]에서 입력하시면 됩니다. ) 반대로 3단을 배치하시려면 "D3"에 값을 넣어주시면 됩니다. "D1"만 값이 입력되어 있으면 교량받침 하면 보강철근은 1단으로 적용이 됩니다. 감사합니다.

More in this list

StatusProductNo.TitleViewsDate
AnsweredAAbutPier#268560Question about the calculation report1802026-09-29
AnsweredAAbutPier#268548Tendon force when placing tendons in the pier cap2182026-09-29
AnsweredAAbutPier#268520Pier seismic check2482026-09-23
AnsweredAAbutPier#268509Transverse reinforcement factor, K1922026-09-22
AnsweredAAbutPier#268492Girder positions in slab dimensions3352026-09-21
AnsweredAAbutPier#268483Transverse pile member forces are "0" in pier pile foundation check1982026-09-21
AnsweredAAbutPier#268482Top and bottom rebar detailing error in pier foundation STM2162026-09-21
AnsweredAAbutPier#268476Question about slab dimensions3062026-09-19
AnsweredAAbutPier#268470Settlement and bearing capacity2692026-09-18
AnsweredAAbutPier#268462Superstructure wind load in the calculation report1912026-09-18
AnsweredAAbutPier#268451Changing bearing location872026-09-18
AnsweredAAbutPier#268445Main rebar placement2892026-09-17
AnsweredAAbutPier#268438Modeling error in seismic analysis4042026-09-17
AnsweredAAbutPier#268433Pier alignment center1862026-09-17
AnsweredAAbutPier#268431Please check the design ground surface displacement2342026-09-17
AnsweredAAbutPier#268422Question about pier2622026-09-17
AnsweredAAbutPier#268416Wprov calculation in the structural calculation report2492026-09-17
AnsweredAAbutPier#268402Increasing the number of column main rebars3912026-09-16
AnsweredAAbutPier#268392Question about cast-in-place piles2222026-09-16
AnsweredAAbutPier#268387Error when entering reinforcing rebar1752026-09-16
Sign in to ask