About section check
현재 교대-1 에서 좌측 날개벽 단면 A 검토시.. 출력 계산서를 보면 오류가 생기는것 같습니다. 형상에서의 문제인지, 계산상 오류인지.. 답변 부탁드립니다.
안녕하세요. 한길아이티입니다. 교대1의 좌측날개벽 계산서를 출력하여 확인하였으나 이상이 없습니다. 다시 확인하여 주시고 이상이 있으시면 출력된 결과를 첨부하여 주시기 바랍니다. 감사합니다.
Follow-up2006-01-24 10:44
단면력이 계산의 오류로 너무 크게 나오는데. SI 단위 변환에서 그런것인지. 제가 확인을 못하겠네요. 날개벽이 7m 에서 다른 해석 파일 과 다르기에 문의 드립니다.
안녕하세요. 한길아이티입니다. 계산서 출력시 단위변환 부분에 잘못 적용된 부분이 있었습니다. 출력상의 오류이며 계산결과는 동일하게 적용이 됩니다. 작업에 불편을 드려서 죄송합니다. 감사합니다. /// 수정된 내용은 아래와 같습니다. ② 단면 A Vd = 125.415 x 1.700 + 13.955 x 2.150 = 243.208 kN Md = 101.925 x 1.700 + 11.906 x 2.150 = 198.870 kN.m Va = (Sd - Sd) + Pa x L = (732.909 - 243.208) + 129.317 x 1.500 = 683.677 kN Ma = (Md - Md) + (Sd - Sd) x L + 1/2·Pa·L² = (1160.632 - 198.870) + (732.909 - 243.208) x 1.500 + 1/2 x 129.317 x 1.500² = 2206.607 kN.m/m a - b 단면에 단위폭으로 등분포 시키면 Vu = 683.677 / 3.640 = 187.803 kN/m Mu = 2206.607 / 3.640 = 606.144 kN.m/m
Follow-up2006-01-24 17:34
② 단면 A Vd = 125.415 x 1.700 + 13.955 x 2.150 = 243.208 kN Md = 101.925 x 1.700 + 11.906 x 2.150 = 198.870 kN.m Va = (Sd - Sd) + Pa x L = (732.909 - 243.208) + 129.317 x 1.500 = 683.677 kN Ma = (Md - Md) + (Sd - Sd) x L + 1/2·Pa·L² = (1160.632 - 198.870) + (732.909 - 243.208) x 1.500 + 1/2 x 129.317 x 1.500² = (961.762) + (734.552) + (145.482) = (1841.796) kN.m/m (결과) = 2206.607 kN.m/m (에러난것 같음) a - b 단면에 단위폭으로 등분포 시키면 Vu = 683.677 / 3.640 = 187.803 kN/m Mu = 1841.796 / 3.640 = 505.988 kN.m/m (결론이 이렇게 나야 할것 같은데요.)
안녕하세요. 한길아이티입니다. A구간 모멘트산정시 D구간의 공제되는 부분중 전단력에의한 모멘트가 잘못 적용된 것 같습니다. 수정하였으며 금일 오전중에 패치에 적용하도록 하겠습니다. 감사합니다.
Attachments on this post were deleted after the retention period (3 years after the last answer) and can no longer be downloaded. If you need the same material, please contact us.
More in this list
| Status | Product | No. | Title | Views | Date |
|---|---|---|---|---|---|
| Answered | AAbutPier | #268560 | Question about the calculation report | 180 | 2026-09-29 |
| Answered | AAbutPier | #268548 | Tendon force when placing tendons in the pier cap | 218 | 2026-09-29 |
| Answered | AAbutPier | #268520 | Pier seismic check | 248 | 2026-09-23 |
| Answered | AAbutPier | #268509 | Transverse reinforcement factor, K | 192 | 2026-09-22 |
| Answered | AAbutPier | #268492 | Girder positions in slab dimensions | 335 | 2026-09-21 |
| Answered | AAbutPier | #268483 | Transverse pile member forces are "0" in pier pile foundation check | 198 | 2026-09-21 |
| Answered | AAbutPier | #268482 | Top and bottom rebar detailing error in pier foundation STM | 216 | 2026-09-21 |
| Answered | AAbutPier | #268476 | Question about slab dimensions | 306 | 2026-09-19 |
| Answered | AAbutPier | #268470 | Settlement and bearing capacity | 269 | 2026-09-18 |
| Answered | AAbutPier | #268462 | Superstructure wind load in the calculation report | 191 | 2026-09-18 |
| Answered | AAbutPier | #268451 | Changing bearing location | 87 | 2026-09-18 |
| Answered | AAbutPier | #268445 | Main rebar placement | 289 | 2026-09-17 |
| Answered | AAbutPier | #268438 | Modeling error in seismic analysis | 404 | 2026-09-17 |
| Answered | AAbutPier | #268433 | Pier alignment center | 186 | 2026-09-17 |
| Answered | AAbutPier | #268431 | Please check the design ground surface displacement | 234 | 2026-09-17 |
| Answered | AAbutPier | #268422 | Question about pier | 262 | 2026-09-17 |
| Answered | AAbutPier | #268416 | Wprov calculation in the structural calculation report | 249 | 2026-09-17 |
| Answered | AAbutPier | #268402 | Increasing the number of column main rebars | 391 | 2026-09-16 |
| Answered | AAbutPier | #268392 | Question about cast-in-place piles | 222 | 2026-09-16 |
| Answered | AAbutPier | #268387 | Error when entering reinforcing rebar | 175 | 2026-09-16 |