Thanks for the quick reply, one more request
빠른 답변 정말 감사합니다. 많은 부분이 해결 되었습니다. 그런데2번 아래 사항은 수직력으로 재하하는것이 맞다면 현재 apier 에서는 모멘트 하중으로 재하되는데 이는 어떻게 해야하는지 부탁드리구요.. 2. 교각 풍하중이 받침부마다 모멘트로 재하되어 있어, 받침별 연직력(우력모멘트 고려)으로 변경 필요함. ->프로그램상 문제임... (모멘트 하중으로 과 우력 모멘트로 재하되는것이 차이가 있는지) => 모멘트하중의 경우 받침위치 절점에 모멘트로 재하되면 우력모멘트로 하는 경우는 수직력으로 환산한 값을 각 절점에 재하를 합니다. 해석 결과는 서로 다르게 나타나며 수직력으로 재하하는 것이 원칙적으로 맞습니다. 그리고 교각 구조계산서에서 기초단면검토에서 도면에서는 지점부 하면이 d29@78즉 79개의 철근이 배근되는데 계산서에는 계속 d29 @ 61ea 로 표시됩니다. 확인부탁드립니다 빠른 답변 감사 합니다.
Answer
안녕하세요. 한길아이티입니다. 1) 모멘트하중을 수직력으로 재하하는 것은 [교각입력]-[설계환경]-"설계선택사항"에 보시면 "모델링해석시 모멘트하중을 수직력으로 재하"를 적용으로 선택하시면 됩니다. 2) 단면검토시 교각기초의 전폭이 아닌 유효폭으로 하여 계산을 하는 경우 전체 배근된 철근개수가 아니라 유효폭내의 철근개수만 검토에 적용이 됩니다. ⑥ 기초 유효폭 산정 : [도로교설계요령 P426] 부분을 참조하시면 됩니다. 참고로 유효폭을 고려하는 부분도 "설계선택사항"에 옵션으로 적용되어 있습니다. 감사합니다.
More in this list
| Status | Product | No. | Title | Views | Date |
|---|---|---|---|---|---|
| Answered | AAbutPier | #268560 | Question about the calculation report | 180 | 2026-09-29 |
| Answered | AAbutPier | #268548 | Tendon force when placing tendons in the pier cap | 218 | 2026-09-29 |
| Answered | AAbutPier | #268520 | Pier seismic check | 248 | 2026-09-23 |
| Answered | AAbutPier | #268509 | Transverse reinforcement factor, K | 192 | 2026-09-22 |
| Answered | AAbutPier | #268492 | Girder positions in slab dimensions | 335 | 2026-09-21 |
| Answered | AAbutPier | #268483 | Transverse pile member forces are "0" in pier pile foundation check | 198 | 2026-09-21 |
| Answered | AAbutPier | #268482 | Top and bottom rebar detailing error in pier foundation STM | 216 | 2026-09-21 |
| Answered | AAbutPier | #268476 | Question about slab dimensions | 306 | 2026-09-19 |
| Answered | AAbutPier | #268470 | Settlement and bearing capacity | 269 | 2026-09-18 |
| Answered | AAbutPier | #268462 | Superstructure wind load in the calculation report | 191 | 2026-09-18 |
| Answered | AAbutPier | #268451 | Changing bearing location | 87 | 2026-09-18 |
| Answered | AAbutPier | #268445 | Main rebar placement | 289 | 2026-09-17 |
| Answered | AAbutPier | #268438 | Modeling error in seismic analysis | 404 | 2026-09-17 |
| Answered | AAbutPier | #268433 | Pier alignment center | 186 | 2026-09-17 |
| Answered | AAbutPier | #268431 | Please check the design ground surface displacement | 234 | 2026-09-17 |
| Answered | AAbutPier | #268422 | Question about pier | 262 | 2026-09-17 |
| Answered | AAbutPier | #268416 | Wprov calculation in the structural calculation report | 249 | 2026-09-17 |
| Answered | AAbutPier | #268402 | Increasing the number of column main rebars | 391 | 2026-09-16 |
| Answered | AAbutPier | #268392 | Question about cast-in-place piles | 222 | 2026-09-16 |
| Answered | AAbutPier | #268387 | Error when entering reinforcing rebar | 175 | 2026-09-16 |