Skip to content
AnsweredAAbutPierQ&A #1972472006-01-19 02:30 · Views 31

Bearing height

교각(P1) 교좌 받침 높이가 수정이 되지 않습니다... 확인 부탁드립니다...

Answer

안녕하세요. 한길아이티입니다. 선형을 참조하여 작업을 하는 경우 교좌면의 위치는 선형상의 입력값으로 설정이 됩니다. 거더의 하단도 설정이 되므로 형하공간은 결정이 되어있습니다. 교좌받침 높이가 수정이 되지않는 것은 이미 결정된 높이에서 H2,H3,H4가 입력값이며 위의 값을 공제한 값이 H1으로 설정이 됩니다. 블럭높이를 조정하시려면 [일반입력]-[슬래브제원]에서 교좌하면 형하공간을 조정하시면 됩니다. 감사합니다.

More in this list

StatusProductNo.TitleViewsDate
AnsweredAAbutPier#268560Question about the calculation report1802026-09-29
AnsweredAAbutPier#268548Tendon force when placing tendons in the pier cap2182026-09-29
AnsweredAAbutPier#268520Pier seismic check2482026-09-23
AnsweredAAbutPier#268509Transverse reinforcement factor, K1922026-09-22
AnsweredAAbutPier#268492Girder positions in slab dimensions3352026-09-21
AnsweredAAbutPier#268483Transverse pile member forces are "0" in pier pile foundation check1982026-09-21
AnsweredAAbutPier#268482Top and bottom rebar detailing error in pier foundation STM2162026-09-21
AnsweredAAbutPier#268476Question about slab dimensions3062026-09-19
AnsweredAAbutPier#268470Settlement and bearing capacity2692026-09-18
AnsweredAAbutPier#268462Superstructure wind load in the calculation report1912026-09-18
AnsweredAAbutPier#268451Changing bearing location882026-09-18
AnsweredAAbutPier#268445Main rebar placement2892026-09-17
AnsweredAAbutPier#268438Modeling error in seismic analysis4042026-09-17
AnsweredAAbutPier#268433Pier alignment center1862026-09-17
AnsweredAAbutPier#268431Please check the design ground surface displacement2342026-09-17
AnsweredAAbutPier#268422Question about pier2622026-09-17
AnsweredAAbutPier#268416Wprov calculation in the structural calculation report2492026-09-17
AnsweredAAbutPier#268402Increasing the number of column main rebars3912026-09-16
AnsweredAAbutPier#268392Question about cast-in-place piles2222026-09-16
AnsweredAAbutPier#268387Error when entering reinforcing rebar1752026-09-16
Sign in to ask