Please check
사용성 검토에 사용되는 n의 값이 탄성계수비와 철근개수 이렇게 들어가는것으로 아는데 현재 그렇게 들어가지 않는듯 하며 날개벽 계산서에서 좌측 날개벽부분에 D구간에 공제부분은 산식과 수식이 일치하지 않으며 파일계산시 df는 말뚝의 근입깊이로 알고있는데 현재 계산서는 1.0m로 나옵니다.(0.1m가 아닌지요?)
안녕하세요. 한길아이티입니다. 1) 사용성 검토에 사용되는 n의 값이 탄성계수비와 철근개수 이렇게 들어가는것으로 아는데 현재 그렇게 들어가지 않는듯 하며 => 사용성 검토시의 n은 탄성계수비이며 현재 9가 적용이 되어있습니다. Es/Ec = 200000.00 / 23237.90 = 8.6~ => 9적용 2) 날개벽 계산서에서 좌측 날개벽부분에 D구간에 공제부분은 산식과 수식이 일치하지 않으며 => A구간 계산시에 공제되는 부분은 직선구간이 없는 삼각형의 형태입니다. (h1=0) (D구간의 아래단이 D구간보다 낮을 경우에 전체 단면력이 아닌 A구간 높이에 해당되는 단면력만을 A구간 계산시에 적용합니다.) 따라서 아래의 산식에서 "h1xL"부분은 값이 "0"이 되며 산식 및 수식은 이상이 없습니다. Vl = ∫p(x)dx = Ko·q·∫(h1 + x/n)dx = Ko·q·(h1·L + L²/(2n)) = 0.426 x 10.000 x (3.070²/ (2 x 1.000)) = 20.080 kN 3) 파일계산시 df는 말뚝의 근입깊이로 알고있는데 현재 계산서는 1.0m로 나옵니다.(0.1m가 아닌지요?) => 말뚝의 근입깊이는 지지지반에 대한 근입깊이이며 현재 입력값으로 되어있습니다. 일반적인 근입깊이는 1.0~1.5m이며 기본값은 1.0m로 되어 있습니다. 말씀하신 0.1m의 경우 기초에 근입된 깊이인 것으로 판단되며 말뚝계산과는 무관한 내용입니다. 감사합니다.
More in this list
| Status | Product | No. | Title | Views | Date |
|---|---|---|---|---|---|
| Answered | AAbutPier | #268560 | Question about the calculation report | 180 | 2026-09-29 |
| Answered | AAbutPier | #268548 | Tendon force when placing tendons in the pier cap | 218 | 2026-09-29 |
| Answered | AAbutPier | #268520 | Pier seismic check | 248 | 2026-09-23 |
| Answered | AAbutPier | #268509 | Transverse reinforcement factor, K | 192 | 2026-09-22 |
| Answered | AAbutPier | #268492 | Girder positions in slab dimensions | 335 | 2026-09-21 |
| Answered | AAbutPier | #268483 | Transverse pile member forces are "0" in pier pile foundation check | 198 | 2026-09-21 |
| Answered | AAbutPier | #268482 | Top and bottom rebar detailing error in pier foundation STM | 216 | 2026-09-21 |
| Answered | AAbutPier | #268476 | Question about slab dimensions | 306 | 2026-09-19 |
| Answered | AAbutPier | #268470 | Settlement and bearing capacity | 269 | 2026-09-18 |
| Answered | AAbutPier | #268462 | Superstructure wind load in the calculation report | 191 | 2026-09-18 |
| Answered | AAbutPier | #268451 | Changing bearing location | 88 | 2026-09-18 |
| Answered | AAbutPier | #268445 | Main rebar placement | 289 | 2026-09-17 |
| Answered | AAbutPier | #268438 | Modeling error in seismic analysis | 404 | 2026-09-17 |
| Answered | AAbutPier | #268433 | Pier alignment center | 186 | 2026-09-17 |
| Answered | AAbutPier | #268431 | Please check the design ground surface displacement | 234 | 2026-09-17 |
| Answered | AAbutPier | #268422 | Question about pier | 262 | 2026-09-17 |
| Answered | AAbutPier | #268416 | Wprov calculation in the structural calculation report | 250 | 2026-09-17 |
| Answered | AAbutPier | #268402 | Increasing the number of column main rebars | 391 | 2026-09-16 |
| Answered | AAbutPier | #268392 | Question about cast-in-place piles | 222 | 2026-09-16 |
| Answered | AAbutPier | #268387 | Error when entering reinforcing rebar | 175 | 2026-09-16 |