Please check
기존 6경간에서 5경간으로 수정을 했는데 .. 내진모델링에서 거더 41번부터 삭제가 안됩니다.. 크로스빔도 삭제가 안되고요..그래서 그런지 sap에서도 모델링에 에러가 있다고 뜨는군요..
Answer
안녕하세요. 한길아이티입니다. 기존의 데이타를 수정하여 사용하는 경우 입력데이타에 대해서는 전체적으로 확인을 하여야 합니다. 1) 설계교각의 개수가 5경간인데 5개로 설정이 되어있습니다. [설계교각입력]에서 권고안을 하시면 4개로 수정이 되며 지점번호등이 다시 설정됩니다. 2) [내진해석 단면입력],[내진해석 가로보설정]에서 권고안을 하신 후에 다시 조정을 하시기 바랍니다. 지간수가 기존 입력과 맞지않아 임으로 조정하는 경우 오류가 발생할 수 있습니다. 3) 기타 입력값은 확인하지 못하였으므로 전체적으로 확인하여 주시기 바랍니다. 임의로 수정한 파일을 첨부하니 참조하시기 바랍니다. (가로보 배치, 단면설정등은 모두 권고안후에 수정한 값입니다.) 감사합니다.
Attachments on this post were deleted after the retention period (3 years after the last answer) and can no longer be downloaded. If you need the same material, please contact us.
More in this list
| Status | Product | No. | Title | Views | Date |
|---|---|---|---|---|---|
| Answered | AAbutPier | #268560 | Question about the calculation report | 180 | 2026-09-29 |
| Answered | AAbutPier | #268548 | Tendon force when placing tendons in the pier cap | 218 | 2026-09-29 |
| Answered | AAbutPier | #268520 | Pier seismic check | 248 | 2026-09-23 |
| Answered | AAbutPier | #268509 | Transverse reinforcement factor, K | 192 | 2026-09-22 |
| Answered | AAbutPier | #268492 | Girder positions in slab dimensions | 335 | 2026-09-21 |
| Answered | AAbutPier | #268483 | Transverse pile member forces are "0" in pier pile foundation check | 198 | 2026-09-21 |
| Answered | AAbutPier | #268482 | Top and bottom rebar detailing error in pier foundation STM | 216 | 2026-09-21 |
| Answered | AAbutPier | #268476 | Question about slab dimensions | 306 | 2026-09-19 |
| Answered | AAbutPier | #268470 | Settlement and bearing capacity | 269 | 2026-09-18 |
| Answered | AAbutPier | #268462 | Superstructure wind load in the calculation report | 191 | 2026-09-18 |
| Answered | AAbutPier | #268451 | Changing bearing location | 88 | 2026-09-18 |
| Answered | AAbutPier | #268445 | Main rebar placement | 289 | 2026-09-17 |
| Answered | AAbutPier | #268438 | Modeling error in seismic analysis | 404 | 2026-09-17 |
| Answered | AAbutPier | #268433 | Pier alignment center | 186 | 2026-09-17 |
| Answered | AAbutPier | #268431 | Please check the design ground surface displacement | 234 | 2026-09-17 |
| Answered | AAbutPier | #268422 | Question about pier | 262 | 2026-09-17 |
| Answered | AAbutPier | #268416 | Wprov calculation in the structural calculation report | 250 | 2026-09-17 |
| Answered | AAbutPier | #268402 | Increasing the number of column main rebars | 391 | 2026-09-16 |
| Answered | AAbutPier | #268392 | Question about cast-in-place piles | 222 | 2026-09-16 |
| Answered | AAbutPier | #268387 | Error when entering reinforcing rebar | 175 | 2026-09-16 |