Skip to content
AnsweredAAbutPierQ&A #1967262005-12-13 06:29 · Views 6

In seismic analysis

내진해석에서 sap 자동실행에서 sap input 생성시 중력가속도(9.8)가 인식이 않되는 것 같은데 올려놓은 파일외에 모든 파일들이 내진해석 sap input 생성오류가 발생하고 있읍니다. AABUTPIER 자체의 설정이 잘못된것지 어떤지 알수가 없네요 갑자기 그러네요 --- SAP INPUT 오류내용 -- MATERIAL NAME=STEEL IDES=C T=0 E=21000000 U=0.15 A=0.00001 NAME=GCONC01 IDES=C T=0 E=2992605 U=0.15 A=0.00001 NAME=CBCONC01 IDES=C T=0 E=2721888 U=0.15 A=0.00001 NAME=CONC IDES=C M=2.5/pStd->m_gValue W=2.5 m_gValue : 9.8 같은데,,,

Answer

안녕하세요. 한길아이티입니다. 패치과정에 오류가 있었습니다. 현재 수정되어 있으며 패치를 하시면 이상이 없습니다. 작업에 불편을 드려 죄송합니다. 감사합니다.

More in this list

StatusProductNo.TitleViewsDate
AnsweredAAbutPier#268560Question about the calculation report1802026-09-29
AnsweredAAbutPier#268548Tendon force when placing tendons in the pier cap2182026-09-29
AnsweredAAbutPier#268520Pier seismic check2482026-09-23
AnsweredAAbutPier#268509Transverse reinforcement factor, K1922026-09-22
AnsweredAAbutPier#268492Girder positions in slab dimensions3352026-09-21
AnsweredAAbutPier#268483Transverse pile member forces are "0" in pier pile foundation check1982026-09-21
AnsweredAAbutPier#268482Top and bottom rebar detailing error in pier foundation STM2162026-09-21
AnsweredAAbutPier#268476Question about slab dimensions3062026-09-19
AnsweredAAbutPier#268470Settlement and bearing capacity2692026-09-18
AnsweredAAbutPier#268462Superstructure wind load in the calculation report1912026-09-18
AnsweredAAbutPier#268451Changing bearing location882026-09-18
AnsweredAAbutPier#268445Main rebar placement2902026-09-17
AnsweredAAbutPier#268438Modeling error in seismic analysis4042026-09-17
AnsweredAAbutPier#268433Pier alignment center1862026-09-17
AnsweredAAbutPier#268431Please check the design ground surface displacement2342026-09-17
AnsweredAAbutPier#268422Question about pier2632026-09-17
AnsweredAAbutPier#268416Wprov calculation in the structural calculation report2512026-09-17
AnsweredAAbutPier#268402Increasing the number of column main rebars3912026-09-16
AnsweredAAbutPier#268392Question about cast-in-place piles2222026-09-16
AnsweredAAbutPier#268387Error when entering reinforcing rebar1752026-09-16
Sign in to ask