Question about elevation calculation
11월 21일날 작업한 에이피어파일과 엘리베이션산출근거 도면입니다. 업로드한후 26일날 다시 에이피어를 돌려서 엘리베이션 산출근거 도면의 엘리베이션이 1MM정도 차이나는 부분.(거창방향 A1 A2)이 있어서 그 이유를 알고싶읍니다
Follow-up2005-11-26 15:48
첨부파일하나더입니다.
안녕하세요. 한길아이티입니다. 오늘자 패치 (날짜변경 하지 않았음)를 받으신 후 확인하시기 바랍니다. 참고로 엘리베이션 산출근거 도면의 자리수 표현 통일에 의하여 EL 산출도 그에 따라 변경되어 0.01 mm 단위에서 변경은 있습니다. 토목계에서는 큰 의미없는 치수이지만 산출근거 산식의 정확성을 위하여 정밀도를 조정하였습니다. 참조하시기 바랍니다. 감사합니다.
Follow-up2005-11-28 11:42
1MM가 의미있다는 뜻이 아닙니다. 같은 파일로 일주일전에는 교대 높이가 8.000M였는데 일주일후 7.999M가 되고, 코핑높이가 1.500M에서 1.501M가 되고, 푸팅 EL이 1MM바뀌는게 문제죠. 업로드 해주셔서 고맙습니다. -------------------------------------------------------------------------- 안녕하세요. 한길아이티입니다. 오늘자 패치 (날짜변경 하지 않았음)를 받으신 후 확인하시기 바랍니다. 참고로 엘리베이션 산출근거 도면의 자리수 표현 통일에 의하여 EL 산출도 그에 따라 변경되어 0.01 mm 단위에서 변경은 있습니다. 토목계에서는 큰 의미없는 치수이지만 산출근거 산식의 정확성을 위하여 정밀도를 조정하였습니다. 참조하시기 바랍니다. 감사합니다.
Attachments on this post were deleted after the retention period (3 years after the last answer) and can no longer be downloaded. If you need the same material, please contact us.
More in this list
| Status | Product | No. | Title | Views | Date |
|---|---|---|---|---|---|
| Answered | AAbutPier | #268560 | Question about the calculation report | 180 | 2026-09-29 |
| Answered | AAbutPier | #268548 | Tendon force when placing tendons in the pier cap | 218 | 2026-09-29 |
| Answered | AAbutPier | #268520 | Pier seismic check | 248 | 2026-09-23 |
| Answered | AAbutPier | #268509 | Transverse reinforcement factor, K | 192 | 2026-09-22 |
| Answered | AAbutPier | #268492 | Girder positions in slab dimensions | 335 | 2026-09-21 |
| Answered | AAbutPier | #268483 | Transverse pile member forces are "0" in pier pile foundation check | 198 | 2026-09-21 |
| Answered | AAbutPier | #268482 | Top and bottom rebar detailing error in pier foundation STM | 216 | 2026-09-21 |
| Answered | AAbutPier | #268476 | Question about slab dimensions | 306 | 2026-09-19 |
| Answered | AAbutPier | #268470 | Settlement and bearing capacity | 269 | 2026-09-18 |
| Answered | AAbutPier | #268462 | Superstructure wind load in the calculation report | 191 | 2026-09-18 |
| Answered | AAbutPier | #268451 | Changing bearing location | 88 | 2026-09-18 |
| Answered | AAbutPier | #268445 | Main rebar placement | 291 | 2026-09-17 |
| Answered | AAbutPier | #268438 | Modeling error in seismic analysis | 404 | 2026-09-17 |
| Answered | AAbutPier | #268433 | Pier alignment center | 186 | 2026-09-17 |
| Answered | AAbutPier | #268431 | Please check the design ground surface displacement | 234 | 2026-09-17 |
| Answered | AAbutPier | #268422 | Question about pier | 264 | 2026-09-17 |
| Answered | AAbutPier | #268416 | Wprov calculation in the structural calculation report | 251 | 2026-09-17 |
| Answered | AAbutPier | #268402 | Increasing the number of column main rebars | 391 | 2026-09-16 |
| Answered | AAbutPier | #268392 | Question about cast-in-place piles | 222 | 2026-09-16 |
| Answered | AAbutPier | #268387 | Error when entering reinforcing rebar | 175 | 2026-09-16 |