Skip to content
AnsweredAAbutPierQ&A #1961062005-11-17 00:52 · Views 25

ELEVATION calculation

업데이트 후 엘리베이션 산출이 좀 이상합니다. 첨부파일 ELEVATION 산출근거도 왜관방향 A1 ①번을 보면 94.204(거더EL)-1.750(거더높이)-0.169(교량받침높이)-0.050(MORTAR두께)-0.181(BLOCK두께)=92.054(교좌면EL)가 나와야 하나 92.055가 나오네요. 확인바랍니다. 기존에 높이10.000m로 되어있던 교대가 9.999m로 나오네요

Answer

안녕하세요. 한길아이티입니다. 반올림이 합하여 질 경우 소수점 자리 반올림에서 오류가 있었습니다. 이전에는 이 반올림을 조정하였는데, 더 정확하게 한다는 것이 실제 설계와는 맞지않았습니다. 수정하였습니다. 19시 패치에 올리겠습니다. 감사합니다.

Attachments on this post were deleted after the retention period (3 years after the last answer) and can no longer be downloaded. If you need the same material, please contact us.

More in this list

StatusProductNo.TitleViewsDate
AnsweredAAbutPier#268560Question about the calculation report1802026-09-29
AnsweredAAbutPier#268548Tendon force when placing tendons in the pier cap2182026-09-29
AnsweredAAbutPier#268520Pier seismic check2482026-09-23
AnsweredAAbutPier#268509Transverse reinforcement factor, K1922026-09-22
AnsweredAAbutPier#268492Girder positions in slab dimensions3352026-09-21
AnsweredAAbutPier#268483Transverse pile member forces are "0" in pier pile foundation check1982026-09-21
AnsweredAAbutPier#268482Top and bottom rebar detailing error in pier foundation STM2162026-09-21
AnsweredAAbutPier#268476Question about slab dimensions3062026-09-19
AnsweredAAbutPier#268470Settlement and bearing capacity2692026-09-18
AnsweredAAbutPier#268462Superstructure wind load in the calculation report1912026-09-18
AnsweredAAbutPier#268451Changing bearing location882026-09-18
AnsweredAAbutPier#268445Main rebar placement2912026-09-17
AnsweredAAbutPier#268438Modeling error in seismic analysis4042026-09-17
AnsweredAAbutPier#268433Pier alignment center1862026-09-17
AnsweredAAbutPier#268431Please check the design ground surface displacement2342026-09-17
AnsweredAAbutPier#268422Question about pier2642026-09-17
AnsweredAAbutPier#268416Wprov calculation in the structural calculation report2512026-09-17
AnsweredAAbutPier#268402Increasing the number of column main rebars3912026-09-16
AnsweredAAbutPier#268392Question about cast-in-place piles2222026-09-16
AnsweredAAbutPier#268387Error when entering reinforcing rebar1752026-09-16
Sign in to ask