Please review the confinement rebar calculation process
항상 수고 많으십니다. 직경이 3m인 기둥에 심부구속철근을 D25, 7.5cm 간격으로 배근하려고 하는데 NG가 나서 문의 드립니다. 입력한 변수와 제가 알고 있는 식은 다음과 같습니다. ---------------------------------------------------------------------------------- S:(심구속철근의 간격:7.5cm) 철근비=(심부구속철근의 체적)/(심부의 체적) = (As * pi * Ds) / (pi*dc^2/4 * S) --> As={(철근비)*dc^2*S} / (4*Ds) 여기서 Ds: 커플러 중심에서 중심까지의 거리 dc: 심부구속된 부분의 직경 = 주철근중심간 거리+주철근 직경 ---------------------------------------------------------------------------------- AAbutPier상에서는 dc와 Ds가 서로 바꿔서 계산되는 것 같고, 그 값도 조금 차이가 있는 것 같습니다. 검토부탁합니다. * 첨부한 apr파일에서 P3을 확인해 보시기 바랍니다.
안녕하세요. 한길아이티입니다. 보내주신식은 조금 잘못 되어 있는것 같습니다. 여기서 dc(dcore) = 기둥심부의 지름(띠철근 외측까지의 덮개) Ds = 기둥심부의 지름 - 사용철근의 지름(띠철근 중심까지의 덮개) 입니다. 띠철근의 외측까지의 덮개를 기둥심부의 지름으로 보는 것은 원기둥의 경우 띠철근에 의한 구속효과를 띠철근 외측까지로 보기 때문입니다.(교량의 내진설계와 내진보강-프리슬리 참조) 도로공사의 내진설계편람의 내용은 심부구속철근의 지름이 잘못 적용되어 있습니다. 다른 생각이 있으시면 전화주시기 바랍니다. 기[이름] [개인정보] [개인정보] 감사합니다.
Attachments on this post were deleted after the retention period (3 years after the last answer) and can no longer be downloaded. If you need the same material, please contact us.
More in this list
| Status | Product | No. | Title | Views | Date |
|---|---|---|---|---|---|
| Answered | AAbutPier | #268560 | Question about the calculation report | 180 | 2026-09-29 |
| Answered | AAbutPier | #268548 | Tendon force when placing tendons in the pier cap | 218 | 2026-09-29 |
| Answered | AAbutPier | #268520 | Pier seismic check | 248 | 2026-09-23 |
| Answered | AAbutPier | #268509 | Transverse reinforcement factor, K | 192 | 2026-09-22 |
| Answered | AAbutPier | #268492 | Girder positions in slab dimensions | 335 | 2026-09-21 |
| Answered | AAbutPier | #268483 | Transverse pile member forces are "0" in pier pile foundation check | 198 | 2026-09-21 |
| Answered | AAbutPier | #268482 | Top and bottom rebar detailing error in pier foundation STM | 216 | 2026-09-21 |
| Answered | AAbutPier | #268476 | Question about slab dimensions | 306 | 2026-09-19 |
| Answered | AAbutPier | #268470 | Settlement and bearing capacity | 269 | 2026-09-18 |
| Answered | AAbutPier | #268462 | Superstructure wind load in the calculation report | 191 | 2026-09-18 |
| Answered | AAbutPier | #268451 | Changing bearing location | 88 | 2026-09-18 |
| Answered | AAbutPier | #268445 | Main rebar placement | 291 | 2026-09-17 |
| Answered | AAbutPier | #268438 | Modeling error in seismic analysis | 404 | 2026-09-17 |
| Answered | AAbutPier | #268433 | Pier alignment center | 186 | 2026-09-17 |
| Answered | AAbutPier | #268431 | Please check the design ground surface displacement | 234 | 2026-09-17 |
| Answered | AAbutPier | #268422 | Question about pier | 265 | 2026-09-17 |
| Answered | AAbutPier | #268416 | Wprov calculation in the structural calculation report | 251 | 2026-09-17 |
| Answered | AAbutPier | #268402 | Increasing the number of column main rebars | 391 | 2026-09-16 |
| Answered | AAbutPier | #268392 | Question about cast-in-place piles | 222 | 2026-09-16 |
| Answered | AAbutPier | #268387 | Error when entering reinforcing rebar | 175 | 2026-09-16 |