Skip to content
AnsweredAAbutPierQ&A #1958292005-11-04 07:55 · Views 18

Pile check does not work for piers

내진해석, 교각본체, 기초까지 OUTPUT파일을 불러들였는데도, 교각 기초부에서 파일검토(설계검토)가 되지 않습니다... 원인을 알려주세요...

Answer

안녕하세요. 한길아이티입니다. [교각입력]-[단면도제원]에서 HL1,HL2의 입력값이 소수점이하의 값을 가지고 있습니다. 아마도 대칭을 만드시려고 하신 것 같습니다. 일반적으로 단면제원에 소수점이하의 값은 적용을 하지는 않습니다. 우선 작업을 하시려면 입력값을 정수의 값으로 입력을 하시면 됩니다. 소수점이하의 값을 가지는 경우에도 오류가 나지않도록 수정하였으며 금일자 패치에 적용하도록 하겠습니다. 감사합니다.

More in this list

StatusProductNo.TitleViewsDate
AnsweredAAbutPier#268560Question about the calculation report1802026-09-29
AnsweredAAbutPier#268548Tendon force when placing tendons in the pier cap2182026-09-29
AnsweredAAbutPier#268520Pier seismic check2482026-09-23
AnsweredAAbutPier#268509Transverse reinforcement factor, K1922026-09-22
AnsweredAAbutPier#268492Girder positions in slab dimensions3352026-09-21
AnsweredAAbutPier#268483Transverse pile member forces are "0" in pier pile foundation check1982026-09-21
AnsweredAAbutPier#268482Top and bottom rebar detailing error in pier foundation STM2162026-09-21
AnsweredAAbutPier#268476Question about slab dimensions3062026-09-19
AnsweredAAbutPier#268470Settlement and bearing capacity2692026-09-18
AnsweredAAbutPier#268462Superstructure wind load in the calculation report1912026-09-18
AnsweredAAbutPier#268451Changing bearing location882026-09-18
AnsweredAAbutPier#268445Main rebar placement2912026-09-17
AnsweredAAbutPier#268438Modeling error in seismic analysis4042026-09-17
AnsweredAAbutPier#268433Pier alignment center1862026-09-17
AnsweredAAbutPier#268431Please check the design ground surface displacement2342026-09-17
AnsweredAAbutPier#268422Question about pier2652026-09-17
AnsweredAAbutPier#268416Wprov calculation in the structural calculation report2512026-09-17
AnsweredAAbutPier#268402Increasing the number of column main rebars3912026-09-16
AnsweredAAbutPier#268392Question about cast-in-place piles2222026-09-16
AnsweredAAbutPier#268387Error when entering reinforcing rebar1752026-09-16
Sign in to ask