Skip to content
AnsweredAAbutPierQ&A #1954642005-10-20 02:30 · Views 63

Abutment reinforcement drawing

시점측 교대 단차 여부에 따라 배근도가 이상하게 나오네요 검토바랍니다.

Answer

안녕하세요. 한길아이티입니다. AAbutPier에서 적용되는 단차범위를 벗어난 설정입니다. 적용되는 단차의 범위는 1) 단차가 계속 증가하거나 감소하는 경우, 2) 단차가 증가후에 감소하는 경우 입니다. 보내주신 파일의 경우 단차가 감소하다 증가하고 다시 감소후 증가하는 형태이어서 적용이 어렵습니다. 또한 선형상에서 설정된 단차와도 차이가 있어 EL등의 값도 일치하지 않을 수 있습니다. 감사합니다.

More in this list

StatusProductNo.TitleViewsDate
AnsweredAAbutPier#268560Question about the calculation report1802026-09-29
AnsweredAAbutPier#268548Tendon force when placing tendons in the pier cap2182026-09-29
AnsweredAAbutPier#268520Pier seismic check2482026-09-23
AnsweredAAbutPier#268509Transverse reinforcement factor, K1952026-09-22
AnsweredAAbutPier#268492Girder positions in slab dimensions3352026-09-21
AnsweredAAbutPier#268483Transverse pile member forces are "0" in pier pile foundation check1982026-09-21
AnsweredAAbutPier#268482Top and bottom rebar detailing error in pier foundation STM2172026-09-21
AnsweredAAbutPier#268476Question about slab dimensions3062026-09-19
AnsweredAAbutPier#268470Settlement and bearing capacity2702026-09-18
AnsweredAAbutPier#268462Superstructure wind load in the calculation report1912026-09-18
AnsweredAAbutPier#268451Changing bearing location882026-09-18
AnsweredAAbutPier#268445Main rebar placement2912026-09-17
AnsweredAAbutPier#268438Modeling error in seismic analysis4042026-09-17
AnsweredAAbutPier#268433Pier alignment center1862026-09-17
AnsweredAAbutPier#268431Please check the design ground surface displacement2342026-09-17
AnsweredAAbutPier#268422Question about pier2652026-09-17
AnsweredAAbutPier#268416Wprov calculation in the structural calculation report2522026-09-17
AnsweredAAbutPier#268402Increasing the number of column main rebars3912026-09-16
AnsweredAAbutPier#268392Question about cast-in-place piles2232026-09-16
AnsweredAAbutPier#268387Error when entering reinforcing rebar1752026-09-16
Sign in to ask