Follow-up question on 17679
그거는 전에 들어서 아는데요 그렇게 3mm 5mm 를 시점에서는 - 종점에서는 + 로 주었더니 첨부한 캐드도면에서처럼 되더라 그것이죠. 그런데 맨 위에 치수선처럼 나와야 하는데 그게 아니더라는 것이죠. 어떻게 해야 하나요? 그리고 단경간 IPC거더 교량인데 문제는 시점에서부터 종점으로 갈때 확폭이 된다는 것이거든요? 그렇게 되다보니 거더 배치가 방사형이 되어야 하고.. 프로그램에서 보니까 거더배치가 평행으로 되던데... 안녕하세요. 한길아이티입니다. 교대의 폭원과 슬래브의 폭원이 다른 경우는 슬래브의 폭원은 원래의 횡단을 입력하시고 [슬래브제원]입력에서 "교대부 좌측 추가거리","교대부 우측 추가거리"를 입력하시면 됩니다. 감사합니다. <><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><> 교대의 폭과 슬래브의 폭이 다른 경우입니다. 슬래브보다 양쪽으로 4mm 5mm더 늘어나는데요. 이거 위에 치수선처럼 나타낼 수 없나요? 이상하게 나오네..
안녕하세요. 한길아이티입니다. 1. , 가 있고 확폭일 경우 오류가 있습니다. 수정하여 오늘 중으로 패치하겠습니다. 2. 확폭인 경우 는 지원하지 않습니다. 직접 슈 좌표를 입력하셔야 합니다. 전화로 연락하였습니다. 감사합니다.
Attachments on this post were deleted after the retention period (3 years after the last answer) and can no longer be downloaded. If you need the same material, please contact us.
More in this list
| Status | Product | No. | Title | Views | Date |
|---|---|---|---|---|---|
| Answered | AAbutPier | #268560 | Question about the calculation report | 180 | 2026-09-29 |
| Answered | AAbutPier | #268548 | Tendon force when placing tendons in the pier cap | 219 | 2026-09-29 |
| Answered | AAbutPier | #268520 | Pier seismic check | 249 | 2026-09-23 |
| Answered | AAbutPier | #268509 | Transverse reinforcement factor, K | 196 | 2026-09-22 |
| Answered | AAbutPier | #268492 | Girder positions in slab dimensions | 335 | 2026-09-21 |
| Answered | AAbutPier | #268483 | Transverse pile member forces are "0" in pier pile foundation check | 198 | 2026-09-21 |
| Answered | AAbutPier | #268482 | Top and bottom rebar detailing error in pier foundation STM | 219 | 2026-09-21 |
| Answered | AAbutPier | #268476 | Question about slab dimensions | 306 | 2026-09-19 |
| Answered | AAbutPier | #268470 | Settlement and bearing capacity | 270 | 2026-09-18 |
| Answered | AAbutPier | #268462 | Superstructure wind load in the calculation report | 191 | 2026-09-18 |
| Answered | AAbutPier | #268451 | Changing bearing location | 88 | 2026-09-18 |
| Answered | AAbutPier | #268445 | Main rebar placement | 291 | 2026-09-17 |
| Answered | AAbutPier | #268438 | Modeling error in seismic analysis | 405 | 2026-09-17 |
| Answered | AAbutPier | #268433 | Pier alignment center | 187 | 2026-09-17 |
| Answered | AAbutPier | #268431 | Please check the design ground surface displacement | 234 | 2026-09-17 |
| Answered | AAbutPier | #268422 | Question about pier | 265 | 2026-09-17 |
| Answered | AAbutPier | #268416 | Wprov calculation in the structural calculation report | 252 | 2026-09-17 |
| Answered | AAbutPier | #268402 | Increasing the number of column main rebars | 392 | 2026-09-16 |
| Answered | AAbutPier | #268392 | Question about cast-in-place piles | 225 | 2026-09-16 |
| Answered | AAbutPier | #268387 | Error when entering reinforcing rebar | 177 | 2026-09-16 |