Centrifugal load (follow-up question)
안녕하십니까. 정말 빠르고 성실한 답변에 감사드립니다. [개인정보]로 생성하는 계산서는 각 값들이 물려들어가지 않는 관계로 간단히 고칠 수 있는 것들도 한길에 도움을 받아야 하기에 이렇게 또 개선사항을 부탁드립니다. 먼저 원심하중의 활하중은 DB하중을 사용해야 하지만 INPUT시에 최대하중만 넣기에 DB하중을 고려한다는 것은 불가능하겠죠? 어짜피 안전측 개념을 사용하면 무리는 없으며, 바라지는 않겠습니다. 그런데, 1. 시방에 보면 최대하중효과가 발생되도록 설계 차로 위에 한대씩 재하하도록 되어있는데, 이는 만재하시가 최대하중이므로 만재시 활하중 반력을 고려하는 것이 맞을 것 같습니다. 다만, 제가 설계하고 있는 교량은 도시내 광로교량으로서 곡선교이지만 구배는 직교처럼 상하행 각각 -2%가 먹어 있는 교량입니다. 따라서 상행선 하행선 구배에 따라 만재시 반력과 만재시 활하중의 절반(또는 편재시의 활하중 반력)을 고려할 수 있도록 반영해 주십시오. 2. 원심하중에 계산되는 활하중은 충격하중이 고려되지 않는 활하중임으로 유저가 INPUT한 반력/충격계수 를 고려하여 적용되게 해주십시오. * 추가질의 : 교대 벽체 검토시 전면(노출면)과 배면의 배치 배력철근량이 반대로 계산되어 단면검토내 단면적비 검토에서 NG가 발생함.(확인 부탁드립니다.) 수고하세요.
안녕하세요. 한길아이티입니다. 1.2의 사항은 전화로 말씀드렸습니다. 추가 질의하신 배력철근 검토부분은 확인하였으며 금일자 패치에 적용하도록 하겠습니다. 감사합니다.
More in this list
| Status | Product | No. | Title | Views | Date |
|---|---|---|---|---|---|
| Answered | AAbutPier | #268560 | Question about the calculation report | 181 | 2026-09-29 |
| Answered | AAbutPier | #268548 | Tendon force when placing tendons in the pier cap | 219 | 2026-09-29 |
| Answered | AAbutPier | #268520 | Pier seismic check | 251 | 2026-09-23 |
| Answered | AAbutPier | #268509 | Transverse reinforcement factor, K | 199 | 2026-09-22 |
| Answered | AAbutPier | #268492 | Girder positions in slab dimensions | 335 | 2026-09-21 |
| Answered | AAbutPier | #268483 | Transverse pile member forces are "0" in pier pile foundation check | 198 | 2026-09-21 |
| Answered | AAbutPier | #268482 | Top and bottom rebar detailing error in pier foundation STM | 221 | 2026-09-21 |
| Answered | AAbutPier | #268476 | Question about slab dimensions | 307 | 2026-09-19 |
| Answered | AAbutPier | #268470 | Settlement and bearing capacity | 270 | 2026-09-18 |
| Answered | AAbutPier | #268462 | Superstructure wind load in the calculation report | 191 | 2026-09-18 |
| Answered | AAbutPier | #268451 | Changing bearing location | 88 | 2026-09-18 |
| Answered | AAbutPier | #268445 | Main rebar placement | 292 | 2026-09-17 |
| Answered | AAbutPier | #268438 | Modeling error in seismic analysis | 407 | 2026-09-17 |
| Answered | AAbutPier | #268433 | Pier alignment center | 187 | 2026-09-17 |
| Answered | AAbutPier | #268431 | Please check the design ground surface displacement | 234 | 2026-09-17 |
| Answered | AAbutPier | #268422 | Question about pier | 265 | 2026-09-17 |
| Answered | AAbutPier | #268416 | Wprov calculation in the structural calculation report | 253 | 2026-09-17 |
| Answered | AAbutPier | #268402 | Increasing the number of column main rebars | 394 | 2026-09-16 |
| Answered | AAbutPier | #268392 | Question about cast-in-place piles | 225 | 2026-09-16 |
| Answered | AAbutPier | #268387 | Error when entering reinforcing rebar | 178 | 2026-09-16 |