Skip to content
AnsweredAAbutPierQ&A #1940142005-08-17 04:12 · Views 33

In the following case

이번에 올린 첨부파일과 같은 경우에 제대로 된 파일을 총교량길이랑 8경간에서 5경간으로 바꾼후 설계교각입력,설계교대입력만 그에 맞게 바꾸었습니다. 그런데 이상한 문제가 있습니다. 교량받침이 원래 두개였는데 하나로 바꼈습니다. 일반입력에 시점및 횡단구성입력,교량받침위치입력등 지점전면,후면이 표시가 안되네요. 그리고 하나더 지간 구성입력에서 종점측 교대가 표시가 안되네요. 어떻게 된것인가요?

Answer

안녕하세요. 한길아이티입니다. 1. 교량받침이 원래 두개였는데 하나로 바꼈습니다. 일반입력에 시점및 횡단구성입력,교량받침위치입력등 지점전면,후면이 표시가 안되네요. ==> 교량기본구성 입력에서 지점에 거더분리나 슬래브분리가 있어야 교량받침이 2열로 입력됩니다. 2. 지간 구성입력에서 종점측 교대가 표시가 안되네요. ==> A2는 단면제원등을 입력하지 않았습니다. 메뉴얼을 숙지하시고 작업하시기 바랍니다. 감사합니다.

Attachments on this post were deleted after the retention period (3 years after the last answer) and can no longer be downloaded. If you need the same material, please contact us.

More in this list

StatusProductNo.TitleViewsDate
AnsweredAAbutPier#268560Question about the calculation report1812026-09-29
AnsweredAAbutPier#268548Tendon force when placing tendons in the pier cap2192026-09-29
AnsweredAAbutPier#268520Pier seismic check2532026-09-23
AnsweredAAbutPier#268509Transverse reinforcement factor, K2012026-09-22
AnsweredAAbutPier#268492Girder positions in slab dimensions3352026-09-21
AnsweredAAbutPier#268483Transverse pile member forces are "0" in pier pile foundation check2012026-09-21
AnsweredAAbutPier#268482Top and bottom rebar detailing error in pier foundation STM2212026-09-21
AnsweredAAbutPier#268476Question about slab dimensions3082026-09-19
AnsweredAAbutPier#268470Settlement and bearing capacity2702026-09-18
AnsweredAAbutPier#268462Superstructure wind load in the calculation report1932026-09-18
AnsweredAAbutPier#268451Changing bearing location882026-09-18
AnsweredAAbutPier#268445Main rebar placement2922026-09-17
AnsweredAAbutPier#268438Modeling error in seismic analysis4082026-09-17
AnsweredAAbutPier#268433Pier alignment center1882026-09-17
AnsweredAAbutPier#268431Please check the design ground surface displacement2352026-09-17
AnsweredAAbutPier#268422Question about pier2652026-09-17
AnsweredAAbutPier#268416Wprov calculation in the structural calculation report2532026-09-17
AnsweredAAbutPier#268402Increasing the number of column main rebars3962026-09-16
AnsweredAAbutPier#268392Question about cast-in-place piles2252026-09-16
AnsweredAAbutPier#268387Error when entering reinforcing rebar1792026-09-16
Sign in to ask