Skip to content
AnsweredAAbutPierQ&A #1939052005-08-10 21:29 · Views 35

Checking pile member forces in plastic design

안녕하세요.. 소성설계에서 말뚝 단면력 체크시.. 기둥하단의 모멘트와 수평력에 대한 모멘트의 합을 응답수정계수(1.5)로 나눠 산정되야될 것 같은데요.. 프로그램상에서는 수평력에 대한 모멘트는 응답수정계수를 고려하지 않고 합산된 것 같습니다.. 안전측으로 너무 과다하게 설계된것 같아 문의드립니다.. 검토바랍니다..

Answer

안녕하세요. 한길아이티입니다. 기둥하단의 모멘트는 소성힌지로 인한 응답수정계수를 고려합니다. 허나 수평력에 의해 기초하부에 발생하는 모멘트의 경우는 소성힌지를 통해 전달되는 힘이 아니므로 직접 기초하부에 작용하게 됩니다. 감사합니다.

More in this list

StatusProductNo.TitleViewsDate
AnsweredAAbutPier#268560Question about the calculation report1812026-09-29
AnsweredAAbutPier#268548Tendon force when placing tendons in the pier cap2192026-09-29
AnsweredAAbutPier#268520Pier seismic check2532026-09-23
AnsweredAAbutPier#268509Transverse reinforcement factor, K2022026-09-22
AnsweredAAbutPier#268492Girder positions in slab dimensions3352026-09-21
AnsweredAAbutPier#268483Transverse pile member forces are "0" in pier pile foundation check2022026-09-21
AnsweredAAbutPier#268482Top and bottom rebar detailing error in pier foundation STM2212026-09-21
AnsweredAAbutPier#268476Question about slab dimensions3092026-09-19
AnsweredAAbutPier#268470Settlement and bearing capacity2712026-09-18
AnsweredAAbutPier#268462Superstructure wind load in the calculation report1932026-09-18
AnsweredAAbutPier#268451Changing bearing location882026-09-18
AnsweredAAbutPier#268445Main rebar placement2922026-09-17
AnsweredAAbutPier#268438Modeling error in seismic analysis4082026-09-17
AnsweredAAbutPier#268433Pier alignment center1882026-09-17
AnsweredAAbutPier#268431Please check the design ground surface displacement2352026-09-17
AnsweredAAbutPier#268422Question about pier2652026-09-17
AnsweredAAbutPier#268416Wprov calculation in the structural calculation report2532026-09-17
AnsweredAAbutPier#268402Increasing the number of column main rebars3962026-09-16
AnsweredAAbutPier#268392Question about cast-in-place piles2252026-09-16
AnsweredAAbutPier#268387Error when entering reinforcing rebar1792026-09-16
Sign in to ask