Skip to content
AnsweredAAbutPierQ&A #1935272005-07-22 17:01 · Views 37

Coping rebar display error

코핑부평면도를보면 코핑주철근2,3단을 보여주기위해 반원으로 파서 보여주는부분이있습니다. C1,C3,C5는 1cycle로써 끊지않고 코핑전폭을 다갑니다. 그리고 C2,C4,C6 은 2cycle로써 중앙부에서는 끊어지는데, 여기서 C4,C6철근이 보여지는 부분을 보면 C3,C5철근이 없습니다. 또한 C8철근은 중앙부 하면 2cycle 철근으로 기둥부에서는 끊어지는데 C7철근과 겹쳐나오고 철근길이도 2000~7320인데 그냥 7320이 아닌지...제가 수정한 Cad 화일을 같이첨부했습니다. 확인부탁드립니다.

Answer

안녕하세요. 한길아이티입니다. 말씀하신 사항 모두 확인하였습니다. 수정해서 패치에 반영하겠습니다. 감사합니다.

Attachments on this post were deleted after the retention period (3 years after the last answer) and can no longer be downloaded. If you need the same material, please contact us.

More in this list

StatusProductNo.TitleViewsDate
AnsweredAAbutPier#268560Question about the calculation report1812026-09-29
AnsweredAAbutPier#268548Tendon force when placing tendons in the pier cap2202026-09-29
AnsweredAAbutPier#268520Pier seismic check2532026-09-23
AnsweredAAbutPier#268509Transverse reinforcement factor, K2022026-09-22
AnsweredAAbutPier#268492Girder positions in slab dimensions3352026-09-21
AnsweredAAbutPier#268483Transverse pile member forces are "0" in pier pile foundation check2032026-09-21
AnsweredAAbutPier#268482Top and bottom rebar detailing error in pier foundation STM2232026-09-21
AnsweredAAbutPier#268476Question about slab dimensions3092026-09-19
AnsweredAAbutPier#268470Settlement and bearing capacity2722026-09-18
AnsweredAAbutPier#268462Superstructure wind load in the calculation report1932026-09-18
AnsweredAAbutPier#268451Changing bearing location882026-09-18
AnsweredAAbutPier#268445Main rebar placement2922026-09-17
AnsweredAAbutPier#268438Modeling error in seismic analysis4082026-09-17
AnsweredAAbutPier#268433Pier alignment center1882026-09-17
AnsweredAAbutPier#268431Please check the design ground surface displacement2352026-09-17
AnsweredAAbutPier#268422Question about pier2662026-09-17
AnsweredAAbutPier#268416Wprov calculation in the structural calculation report2542026-09-17
AnsweredAAbutPier#268402Increasing the number of column main rebars3962026-09-16
AnsweredAAbutPier#268392Question about cast-in-place piles2252026-09-16
AnsweredAAbutPier#268387Error when entering reinforcing rebar1802026-09-16
Sign in to ask