Skip to content
AnsweredAAbutPierQ&A #1935022005-07-22 01:39 · Views 32

Section drawing dimensions

단면도 제원에서 ph값이 1116이 되야하고, 교좌면의 DL1은 470, DL2는 330이 되야합니다. 선형도 레벨로 잡아놨는데, 왜 PH값이 1080이 되는지 모르겠습니다. 교량받침위치입력에서 H1값을 조정해도 도무지 숫자가 바뀌질 않습니다. 입력이 잘못되었는지 알려주십쇼.

Answer

안녕하세요. 한길아이티입니다. 선형참조를 자동으로 설정한 후 [단면도 제원]에서 적용을 누르면 PH값이 1116으로 계산되어 집니다. 선형참조가 수동으로 된 경우 PH값은 직접 1116으로 입력하셔야 합니다. 감사합니다.

More in this list

StatusProductNo.TitleViewsDate
AnsweredAAbutPier#268560Question about the calculation report1812026-09-29
AnsweredAAbutPier#268548Tendon force when placing tendons in the pier cap2202026-09-29
AnsweredAAbutPier#268520Pier seismic check2532026-09-23
AnsweredAAbutPier#268509Transverse reinforcement factor, K2022026-09-22
AnsweredAAbutPier#268492Girder positions in slab dimensions3352026-09-21
AnsweredAAbutPier#268483Transverse pile member forces are "0" in pier pile foundation check2032026-09-21
AnsweredAAbutPier#268482Top and bottom rebar detailing error in pier foundation STM2232026-09-21
AnsweredAAbutPier#268476Question about slab dimensions3092026-09-19
AnsweredAAbutPier#268470Settlement and bearing capacity2722026-09-18
AnsweredAAbutPier#268462Superstructure wind load in the calculation report1932026-09-18
AnsweredAAbutPier#268451Changing bearing location882026-09-18
AnsweredAAbutPier#268445Main rebar placement2922026-09-17
AnsweredAAbutPier#268438Modeling error in seismic analysis4082026-09-17
AnsweredAAbutPier#268433Pier alignment center1882026-09-17
AnsweredAAbutPier#268431Please check the design ground surface displacement2352026-09-17
AnsweredAAbutPier#268422Question about pier2662026-09-17
AnsweredAAbutPier#268416Wprov calculation in the structural calculation report2542026-09-17
AnsweredAAbutPier#268402Increasing the number of column main rebars3962026-09-16
AnsweredAAbutPier#268392Question about cast-in-place piles2252026-09-16
AnsweredAAbutPier#268387Error when entering reinforcing rebar1802026-09-16
Sign in to ask