Skip to content
AnsweredAAbutPierQ&A #1933922005-07-19 03:05 · Views 36

Shear rebar detailing error in pier cap beam

교각의 두부보에서 전단 및 철근의 배근이 이상하게 표현되는데 권고안을 눌러도 바뀌지않습니다. 확인 부탁드립니다.

Answer

안녕하세요. 한길아이티입니다. [교각입력] - [단면도제원] 에서 HL1과 HL2의 값은 두부보 외측하단에 경사를 주기 위한 값입니다. 따라서 경사가 없는 형태의 두부보를 설계하기 위해선 HL1과 HL2값이 없어야 하며, 두부보의 위치는 CL1값으로 조정하셔야 됩니다. CL1에 HL1값을 더해서 입력하시면 됩니다. 그리고 HL3값은 두부보 내측 헌치의 높이를 조정하기 위한 값이므로, HL1, HL2와 마찬가지고 0으로 입력하시기 바랍니다. 감사합니다.

More in this list

StatusProductNo.TitleViewsDate
AnsweredAAbutPier#268560Question about the calculation report1812026-09-29
AnsweredAAbutPier#268548Tendon force when placing tendons in the pier cap2202026-09-29
AnsweredAAbutPier#268520Pier seismic check2542026-09-23
AnsweredAAbutPier#268509Transverse reinforcement factor, K2022026-09-22
AnsweredAAbutPier#268492Girder positions in slab dimensions3352026-09-21
AnsweredAAbutPier#268483Transverse pile member forces are "0" in pier pile foundation check2032026-09-21
AnsweredAAbutPier#268482Top and bottom rebar detailing error in pier foundation STM2232026-09-21
AnsweredAAbutPier#268476Question about slab dimensions3092026-09-19
AnsweredAAbutPier#268470Settlement and bearing capacity2722026-09-18
AnsweredAAbutPier#268462Superstructure wind load in the calculation report1932026-09-18
AnsweredAAbutPier#268451Changing bearing location882026-09-18
AnsweredAAbutPier#268445Main rebar placement2922026-09-17
AnsweredAAbutPier#268438Modeling error in seismic analysis4082026-09-17
AnsweredAAbutPier#268433Pier alignment center1882026-09-17
AnsweredAAbutPier#268431Please check the design ground surface displacement2352026-09-17
AnsweredAAbutPier#268422Question about pier2672026-09-17
AnsweredAAbutPier#268416Wprov calculation in the structural calculation report2542026-09-17
AnsweredAAbutPier#268402Increasing the number of column main rebars3962026-09-16
AnsweredAAbutPier#268392Question about cast-in-place piles2252026-09-16
AnsweredAAbutPier#268387Error when entering reinforcing rebar1802026-09-16
Sign in to ask