Skip to content
AnsweredAAbutPierQ&A #1932172005-07-11 16:17 · Views 19

Checking combined member forces for pier columns

1) 합성부재력에서 지진시는 각각의 방향에서 큰값이 아닌 내진하중조합중 1의 경우의 값을 사용하는데 항상 하중경우1의 값을 사용하는것인가요, 아니면 합성력(M=(mx^2+my^2)^0.5)을 검토하여 하중경우1 이 크기 때문에 이것을 사용한것인가요? 2) 모멘트이외의 값을 확인해보면 교축, 교축직각, 합성부재력의 값이 똑같은데 그럼 교축, 교축직각검토없이 합성부재력만 검토해도 되지않나요? (모멘트의 경우 합성력이 항상 크므로..)

Answer

안녕하세요. 한길아이티입니다. 전화상으로 말씀드렸습니다. 감사합니다.

More in this list

StatusProductNo.TitleViewsDate
AnsweredAAbutPier#268560Question about the calculation report1812026-09-29
AnsweredAAbutPier#268548Tendon force when placing tendons in the pier cap2202026-09-29
AnsweredAAbutPier#268520Pier seismic check2552026-09-23
AnsweredAAbutPier#268509Transverse reinforcement factor, K2022026-09-22
AnsweredAAbutPier#268492Girder positions in slab dimensions3352026-09-21
AnsweredAAbutPier#268483Transverse pile member forces are "0" in pier pile foundation check2032026-09-21
AnsweredAAbutPier#268482Top and bottom rebar detailing error in pier foundation STM2232026-09-21
AnsweredAAbutPier#268476Question about slab dimensions3092026-09-19
AnsweredAAbutPier#268470Settlement and bearing capacity2722026-09-18
AnsweredAAbutPier#268462Superstructure wind load in the calculation report1932026-09-18
AnsweredAAbutPier#268451Changing bearing location882026-09-18
AnsweredAAbutPier#268445Main rebar placement2922026-09-17
AnsweredAAbutPier#268438Modeling error in seismic analysis4082026-09-17
AnsweredAAbutPier#268433Pier alignment center1882026-09-17
AnsweredAAbutPier#268431Please check the design ground surface displacement2352026-09-17
AnsweredAAbutPier#268422Question about pier2672026-09-17
AnsweredAAbutPier#268416Wprov calculation in the structural calculation report2542026-09-17
AnsweredAAbutPier#268402Increasing the number of column main rebars3962026-09-16
AnsweredAAbutPier#268392Question about cast-in-place piles2252026-09-16
AnsweredAAbutPier#268387Error when entering reinforcing rebar1802026-09-16
Sign in to ask