About girder layout
수고하십니다. 빔교에서 거더배치시 "거더 시종점 기울기 적용" 에서 연장부와 축소부의 적용유무에 관해서 상세한 설명 부탁드립니다. 연장부를 선택했을때는 축소부도 같이 선택을 해야하고, 연장부를 선택안했을때는 축소부도 같이 선택을 안해야 하는것 아닌지 궁금합니다. 그리고 기울기를 적용했을때와 안했을때의 차이점도 부탁드립니다.
안녕하세요. 한길아이티입니다. 종단구배에 따라 거더의 기울기를 고려한 만큼 평면상의 교량 station이 바뀌게 됩니다. 이때 보통의 경우 계산된 유간에 맞춰 거더를 배치하게 되는데, 이때는 거더의 상면쪽 길이를 기준으로 지간을 구성하게 됩니다. 이때 종단구배에 따른 거더의 기울기는 연장부만을 선택하여 지간을 구성하는게 바람직합니다. 축소부도 같이 고려하는 경우는 그림의 예를 보시면 EL이 낮은쪽 거더부는 유간에 맞춰 거더를 배치하고 높은쪽 거더부는 거더 하면쪽이 흉벽쪽으로 튀어나가게 되는데, 이때 교대 흉벽 전면에서 떨어진 거리를 일정하게 조절해줄때 고려하게 됩니다. 따라서 연장부와 축소부의 선택에 따라 지간구성이 차이가 나게 되고 교량의 station도 바뀌게 됩니다. 기울기를 적용하지 않게 되면 실제 시공시의 교량받침의 위치와 설계시의 교량받침의 위치가 차이가 나게 됩니다. 첨부된 그림을 참조하시기 바랍니다. 감사합니다.
Attachments on this post were deleted after the retention period (3 years after the last answer) and can no longer be downloaded. If you need the same material, please contact us.
More in this list
| Status | Product | No. | Title | Views | Date |
|---|---|---|---|---|---|
| Answered | AAbutPier | #268560 | Question about the calculation report | 181 | 2026-09-29 |
| Answered | AAbutPier | #268548 | Tendon force when placing tendons in the pier cap | 220 | 2026-09-29 |
| Answered | AAbutPier | #268520 | Pier seismic check | 255 | 2026-09-23 |
| Answered | AAbutPier | #268509 | Transverse reinforcement factor, K | 202 | 2026-09-22 |
| Answered | AAbutPier | #268492 | Girder positions in slab dimensions | 335 | 2026-09-21 |
| Answered | AAbutPier | #268483 | Transverse pile member forces are "0" in pier pile foundation check | 203 | 2026-09-21 |
| Answered | AAbutPier | #268482 | Top and bottom rebar detailing error in pier foundation STM | 223 | 2026-09-21 |
| Answered | AAbutPier | #268476 | Question about slab dimensions | 309 | 2026-09-19 |
| Answered | AAbutPier | #268470 | Settlement and bearing capacity | 272 | 2026-09-18 |
| Answered | AAbutPier | #268462 | Superstructure wind load in the calculation report | 193 | 2026-09-18 |
| Answered | AAbutPier | #268451 | Changing bearing location | 88 | 2026-09-18 |
| Answered | AAbutPier | #268445 | Main rebar placement | 292 | 2026-09-17 |
| Answered | AAbutPier | #268438 | Modeling error in seismic analysis | 410 | 2026-09-17 |
| Answered | AAbutPier | #268433 | Pier alignment center | 188 | 2026-09-17 |
| Answered | AAbutPier | #268431 | Please check the design ground surface displacement | 235 | 2026-09-17 |
| Answered | AAbutPier | #268422 | Question about pier | 267 | 2026-09-17 |
| Answered | AAbutPier | #268416 | Wprov calculation in the structural calculation report | 254 | 2026-09-17 |
| Answered | AAbutPier | #268402 | Increasing the number of column main rebars | 398 | 2026-09-16 |
| Answered | AAbutPier | #268392 | Question about cast-in-place piles | 225 | 2026-09-16 |
| Answered | AAbutPier | #268387 | Error when entering reinforcing rebar | 180 | 2026-09-16 |