Question about pier calculation section
1. T형교각이나 다주식교각등에서 모델링시 rigid link 부분이 없음으로 코핑부와 교각부의 연결부에 자중이 중첩되어 들어가고 있습니다. 확인부탁드립니다. 2. 교각계산서에서 탄성설계에 사용하는 모멘트는 하중조합에 의해 나온 값을 사용하지만 소성설계에 사용하는 모멘트는 응답수정계수를 적용한 값을 사용하게 되어 있습니다. 그런데 부재력 집계에 보면 탄성설계에 사용하는 모멘트를 응답수정계수로 나누면 소성설계에 사용하는 모멘트 값과 다르게 나옵니다. 계산보다 더 큰 값을 소성설계모멘트로 사용하고 있는 것 같은데 확인 부탁드립니다.
안녕하세요. 한길아이티입니다. 1. T형교각이나 다주식교각등에서 모델링시 rigid link 부분이 없음으로 코핑부와 교각부의 연결부에 자중이 중첩되어 들어가고 있습니다. 확인부탁드립니다. -> 보내주신 파일로 인풋data를 생성하면 아래와 같이 기둥 상단에 옵셋처리가 정상적으로 되어 자중이 중첩되지 않고 들어간것을 것을 확인할 수 있습니다. 21 J= 11, 22 SEC=COLU NSEG=4 IOFF=1.750 JOFF=0 RIGID=1 기둥부재력 집계의 산출근거는 아래와 같습니다. 설명을 표의 아랫쪽에 삽입하도록 하겠습니다. 교축직각방향 E-TR / R + D = Mt(ul-22) (490.291/3 + 158.143 = 321.573) 교축방향 E-LO / R = Mt(ul-22) (546.718/3 = 182.239) 어제/오늘 계속전화드렸는데 통화중이더군여...!! [개인정보] [개인정보] 전화번호 틀렸다면 메일부탁드립니다. [개인정보] 감사합니다.
More in this list
| Status | Product | No. | Title | Views | Date |
|---|---|---|---|---|---|
| Answered | AAbutPier | #268560 | Question about the calculation report | 181 | 2026-09-29 |
| Answered | AAbutPier | #268548 | Tendon force when placing tendons in the pier cap | 220 | 2026-09-29 |
| Answered | AAbutPier | #268520 | Pier seismic check | 256 | 2026-09-23 |
| Answered | AAbutPier | #268509 | Transverse reinforcement factor, K | 202 | 2026-09-22 |
| Answered | AAbutPier | #268492 | Girder positions in slab dimensions | 336 | 2026-09-21 |
| Answered | AAbutPier | #268483 | Transverse pile member forces are "0" in pier pile foundation check | 203 | 2026-09-21 |
| Answered | AAbutPier | #268482 | Top and bottom rebar detailing error in pier foundation STM | 223 | 2026-09-21 |
| Answered | AAbutPier | #268476 | Question about slab dimensions | 310 | 2026-09-19 |
| Answered | AAbutPier | #268470 | Settlement and bearing capacity | 273 | 2026-09-18 |
| Answered | AAbutPier | #268462 | Superstructure wind load in the calculation report | 193 | 2026-09-18 |
| Answered | AAbutPier | #268451 | Changing bearing location | 88 | 2026-09-18 |
| Answered | AAbutPier | #268445 | Main rebar placement | 293 | 2026-09-17 |
| Answered | AAbutPier | #268438 | Modeling error in seismic analysis | 410 | 2026-09-17 |
| Answered | AAbutPier | #268433 | Pier alignment center | 188 | 2026-09-17 |
| Answered | AAbutPier | #268431 | Please check the design ground surface displacement | 235 | 2026-09-17 |
| Answered | AAbutPier | #268422 | Question about pier | 267 | 2026-09-17 |
| Answered | AAbutPier | #268416 | Wprov calculation in the structural calculation report | 254 | 2026-09-17 |
| Answered | AAbutPier | #268402 | Increasing the number of column main rebars | 398 | 2026-09-16 |
| Answered | AAbutPier | #268392 | Question about cast-in-place piles | 225 | 2026-09-16 |
| Answered | AAbutPier | #268387 | Error when entering reinforcing rebar | 180 | 2026-09-16 |