Question about quantities
일반수량부분에서 시점측 교대 접속슬래브 수량은 제대로 산출이 되는데, 종점측 접속슬래브 부분에서 (2. 콘크리트(150강도) 수량과 3.거푸집(매끈한마감)과 4.(거친마감)) 부분이 제대로 산출이 않 되고 있습니다. 시점측과 종점측은 동일한 구성인데 접속슬래브 산출은 다르게 산출되고 있습니다. 확인 좀 부탁드립니다. 한 가지 더 부탁드리면 계산서 설계요약부분에 사용철근량이 "D32@200" 형식으로 정리되는데 "D32@200=39.710" 이런 형식으로 정리가 가능할까요? 저희가 보더라도, 감독이 보더라도 요약부분을 보고는 철근비를 따지기나 어렵다고 말을 계속 합니다. 좀 부탁드립니다. 수고하세요.
안녕하세요. 한길아이티입니다. 1) 일반수량부분에서 시점측 교대 접속슬래브 수량은 제대로 산출이 되는데, 종점측 접속슬래브 부분에서 (2. 콘크리트(150강도) 수량과 3.거푸집(매끈한마감)과 4.(거친마감)) 부분이 제대로 산출이 않 되고 있습니다. 시점측과 종점측은 동일한 구성인데 접속슬래브 산출은 다르게 산출되고 있습니다. 확인 좀 부탁드립니다. => 수정하였습니다. 금일자 패치에 적용하도록 하겠습니다. 2) 한 가지 더 부탁드리면 계산서 설계요약부분에 사용철근량이 "D32@200" 형식으로 정리되는데 "D32@200=39.710" 이런 형식으로 정리가 가능할까요? 저희가 보더라도, 감독이 보더라도 요약부분을 보고는 철근비를 따지기나 어렵다고 말을 계속 합니다. 좀 부탁드립니다. => 설계요약은 해석결과를 표를 집계를 하는 형식이라서 그대로 적어넣기는 공간이 부족합니다. 말씀하신 부분은 출력표의 양식을 변경하여 개선방안을 검토하도록 하겠습니다. 감사합니다.
More in this list
| Status | Product | No. | Title | Views | Date |
|---|---|---|---|---|---|
| Answered | AAbutPier | #268560 | Question about the calculation report | 181 | 2026-09-29 |
| Answered | AAbutPier | #268548 | Tendon force when placing tendons in the pier cap | 220 | 2026-09-29 |
| Answered | AAbutPier | #268520 | Pier seismic check | 256 | 2026-09-23 |
| Answered | AAbutPier | #268509 | Transverse reinforcement factor, K | 202 | 2026-09-22 |
| Answered | AAbutPier | #268492 | Girder positions in slab dimensions | 336 | 2026-09-21 |
| Answered | AAbutPier | #268483 | Transverse pile member forces are "0" in pier pile foundation check | 203 | 2026-09-21 |
| Answered | AAbutPier | #268482 | Top and bottom rebar detailing error in pier foundation STM | 223 | 2026-09-21 |
| Answered | AAbutPier | #268476 | Question about slab dimensions | 310 | 2026-09-19 |
| Answered | AAbutPier | #268470 | Settlement and bearing capacity | 273 | 2026-09-18 |
| Answered | AAbutPier | #268462 | Superstructure wind load in the calculation report | 193 | 2026-09-18 |
| Answered | AAbutPier | #268451 | Changing bearing location | 88 | 2026-09-18 |
| Answered | AAbutPier | #268445 | Main rebar placement | 293 | 2026-09-17 |
| Answered | AAbutPier | #268438 | Modeling error in seismic analysis | 410 | 2026-09-17 |
| Answered | AAbutPier | #268433 | Pier alignment center | 188 | 2026-09-17 |
| Answered | AAbutPier | #268431 | Please check the design ground surface displacement | 235 | 2026-09-17 |
| Answered | AAbutPier | #268422 | Question about pier | 267 | 2026-09-17 |
| Answered | AAbutPier | #268416 | Wprov calculation in the structural calculation report | 254 | 2026-09-17 |
| Answered | AAbutPier | #268402 | Increasing the number of column main rebars | 398 | 2026-09-16 |
| Answered | AAbutPier | #268392 | Question about cast-in-place piles | 225 | 2026-09-16 |
| Answered | AAbutPier | #268387 | Error when entering reinforcing rebar | 180 | 2026-09-16 |