Calculating the stability index in pier column check
교각의 기둥검토시에 층안정지수를 구하여 검토를 하게 되는데, 여기서 층안정지수 산출하는데 적용되는 상대변위 Δ 는 SAP2000 에서 해석된 결과를 그대로 적용하는 것으로 알고 있습니다. 본사에서도 귀사에서 제시한 방법으로 설계를 진행하였으나 최근에 수행한 프로젝트 심의에서 기둥 변위값을 구하는데에 Gross Section에 대한 단면2차모멘트 Ig를 적용하면 안되고, 유효단면2차모멘트 Ie를 적용해야 한다는 지적사항이 있었습니다. 본인의 생각에는 교각기둥이 철근콘크리트 단면임을 감안할때, 처짐량은 Cracked Section 에 대한 유효단면2차모멘트, Ie=((Mcr/M)^3)Ig + (1-(Mcr/M)^3)Icr 을 적용해야 한다는 뜻으로 보입니다. 실제 철근콘크리트 부재의 처짐량 산정시에는 위와 같은 내용을 지키는 것이 타당하다고 생각합니다. 그래서 귀사에서 이와같은 내용을 AAbutPier에 적용해 주셨으면 합니다. 만일 다른내용이라 생각되신다면, [개인정보] 로 전화부탁드립니다.
Answer
안녕하세요. 한길아이티입니다. 콘크리트설계기준의 휨 및 압축편을 검토해 본 결과, 강성도비 외에 유효단면2차모멘트를 사용하는 식을 콘크리트설계기준에서 발견할 수가 없었습니다. 강성도비 Ψ를 계산하면서 유효단면2차모멘트가 적용하였고, 강성도비를 가지고 유효좌굴길이계수 k값을 산정하게 됩니다. 따라서 모델링에서도 유효단면2차모멘트를 고려하여 계산하게 되면 2중으로 유효단면2차모멘트가 적용되는 것이 아닌가 판단됩니다. 감사합니다.
More in this list
| Status | Product | No. | Title | Views | Date |
|---|---|---|---|---|---|
| Answered | AAbutPier | #268560 | Question about the calculation report | 181 | 2026-09-29 |
| Answered | AAbutPier | #268548 | Tendon force when placing tendons in the pier cap | 221 | 2026-09-29 |
| Answered | AAbutPier | #268520 | Pier seismic check | 256 | 2026-09-23 |
| Answered | AAbutPier | #268509 | Transverse reinforcement factor, K | 202 | 2026-09-22 |
| Answered | AAbutPier | #268492 | Girder positions in slab dimensions | 336 | 2026-09-21 |
| Answered | AAbutPier | #268483 | Transverse pile member forces are "0" in pier pile foundation check | 203 | 2026-09-21 |
| Answered | AAbutPier | #268482 | Top and bottom rebar detailing error in pier foundation STM | 223 | 2026-09-21 |
| Answered | AAbutPier | #268476 | Question about slab dimensions | 312 | 2026-09-19 |
| Answered | AAbutPier | #268470 | Settlement and bearing capacity | 274 | 2026-09-18 |
| Answered | AAbutPier | #268462 | Superstructure wind load in the calculation report | 193 | 2026-09-18 |
| Answered | AAbutPier | #268451 | Changing bearing location | 88 | 2026-09-18 |
| Answered | AAbutPier | #268445 | Main rebar placement | 293 | 2026-09-17 |
| Answered | AAbutPier | #268438 | Modeling error in seismic analysis | 410 | 2026-09-17 |
| Answered | AAbutPier | #268433 | Pier alignment center | 188 | 2026-09-17 |
| Answered | AAbutPier | #268431 | Please check the design ground surface displacement | 235 | 2026-09-17 |
| Answered | AAbutPier | #268422 | Question about pier | 267 | 2026-09-17 |
| Answered | AAbutPier | #268416 | Wprov calculation in the structural calculation report | 254 | 2026-09-17 |
| Answered | AAbutPier | #268402 | Increasing the number of column main rebars | 398 | 2026-09-16 |
| Answered | AAbutPier | #268392 | Question about cast-in-place piles | 226 | 2026-09-16 |
| Answered | AAbutPier | #268387 | Error when entering reinforcing rebar | 180 | 2026-09-16 |