Skip to content
AnsweredAAbutPierQ&A #1924952005-06-10 20:25 · Views 61

Please check the bearings of pier P3

교좌면의 위치가 이상하게 나옵니다..교각위에 슈가 4개가 올라가는 형식인데 슈위치가 이상합니다.

Answer

안녕하세요. 한길아이티입니다. 1. 선형입력에서 반지름 R값이 입력되어져야 합니다. 현재 교량의 경우 최소 1001mm 이상 2. 선형 시종점이 교량 시종점보다 커야 합니다. 교량 시점 스테이션이 "0"부터 시작한다면, "-5000" 정도는 되는 것이 좋습니다. 선형을 다시한번 점검하여 주시기바랍니다. 의문사항이 있으시면, 전화부탁드립니다. [한길 담당자] [전화] 감사합니다.

More in this list

StatusProductNo.TitleViewsDate
AnsweredAAbutPier#268560Question about the calculation report1812026-09-29
AnsweredAAbutPier#268548Tendon force when placing tendons in the pier cap2212026-09-29
AnsweredAAbutPier#268520Pier seismic check2572026-09-23
AnsweredAAbutPier#268509Transverse reinforcement factor, K2022026-09-22
AnsweredAAbutPier#268492Girder positions in slab dimensions3362026-09-21
AnsweredAAbutPier#268483Transverse pile member forces are "0" in pier pile foundation check2032026-09-21
AnsweredAAbutPier#268482Top and bottom rebar detailing error in pier foundation STM2242026-09-21
AnsweredAAbutPier#268476Question about slab dimensions3122026-09-19
AnsweredAAbutPier#268470Settlement and bearing capacity2742026-09-18
AnsweredAAbutPier#268462Superstructure wind load in the calculation report1932026-09-18
AnsweredAAbutPier#268451Changing bearing location882026-09-18
AnsweredAAbutPier#268445Main rebar placement2932026-09-17
AnsweredAAbutPier#268438Modeling error in seismic analysis4112026-09-17
AnsweredAAbutPier#268433Pier alignment center1882026-09-17
AnsweredAAbutPier#268431Please check the design ground surface displacement2352026-09-17
AnsweredAAbutPier#268422Question about pier2672026-09-17
AnsweredAAbutPier#268416Wprov calculation in the structural calculation report2542026-09-17
AnsweredAAbutPier#268402Increasing the number of column main rebars3982026-09-16
AnsweredAAbutPier#268392Question about cast-in-place piles2262026-09-16
AnsweredAAbutPier#268387Error when entering reinforcing rebar1802026-09-16
Sign in to ask