Skip to content
AnsweredAAbutPierQ&A #1922472005-05-31 14:11 · Views 20

Applying response modification factor to piles

질문) 구조계산서를 보니 기초, 말뚝 모두 응답수정계수 R의 1/2를 적용하는 것 같습니다. 도로교 설계기준(2000,2005) 6.4.7.2 에는 기초의 설계지지력은 탄성지지력을 응답수정계수 R의 1/2로 나눈 값을 하고 말뚝의 설계지지력은 탄성지지력을 해당구조의 응답수정계수 R로 나눈값으로 적용한다라고 나와있습니다. 기초, 말뚝 모두 응답수정계수 R의 1/2를 적용한 근거는 무엇입니까?

Answer

안녕하세요. 한길아이티입니다. 자세히 읽어 보시기 바랍니다. 원문 "확대기초, 말뚝머리 및 말뚝을 포함하는 기초의 설계지진력은 6.4.4의 하중경우 1과 하중경우 2로부터 구한 탄성지진력을 6.3.4에 규정한 하부구조(기둥 또는 교각)에 대한 응답수정계수 R의 1/2로 나눈 값으로 한다." ==> 같이 적용하라고 나와 있습니다. 감사합니다.

More in this list

StatusProductNo.TitleViewsDate
AnsweredAAbutPier#268560Question about the calculation report1812026-09-29
AnsweredAAbutPier#268548Tendon force when placing tendons in the pier cap2212026-09-29
AnsweredAAbutPier#268520Pier seismic check2572026-09-23
AnsweredAAbutPier#268509Transverse reinforcement factor, K2022026-09-22
AnsweredAAbutPier#268492Girder positions in slab dimensions3362026-09-21
AnsweredAAbutPier#268483Transverse pile member forces are "0" in pier pile foundation check2032026-09-21
AnsweredAAbutPier#268482Top and bottom rebar detailing error in pier foundation STM2242026-09-21
AnsweredAAbutPier#268476Question about slab dimensions3122026-09-19
AnsweredAAbutPier#268470Settlement and bearing capacity2742026-09-18
AnsweredAAbutPier#268462Superstructure wind load in the calculation report1932026-09-18
AnsweredAAbutPier#268451Changing bearing location882026-09-18
AnsweredAAbutPier#268445Main rebar placement2942026-09-17
AnsweredAAbutPier#268438Modeling error in seismic analysis4112026-09-17
AnsweredAAbutPier#268433Pier alignment center1892026-09-17
AnsweredAAbutPier#268431Please check the design ground surface displacement2352026-09-17
AnsweredAAbutPier#268422Question about pier2672026-09-17
AnsweredAAbutPier#268416Wprov calculation in the structural calculation report2542026-09-17
AnsweredAAbutPier#268402Increasing the number of column main rebars3982026-09-16
AnsweredAAbutPier#268392Question about cast-in-place piles2262026-09-16
AnsweredAAbutPier#268387Error when entering reinforcing rebar1802026-09-16
Sign in to ask