Skip to content
AnsweredAAbutPierQ&A #1912882005-04-01 17:06 · Views 185

Punching shear

⑧ 수평 지압강도에 대한 검토 l : 말뚝의 매입길이 * 수직지압강도 φHn = 0.800 x ( 0.85 x 240.0 x 10.000 ) = 82905.600 kgf ≥ PHmax = 10117.486 kgf ∴ O.K ⑦ PUNCHING 전단강도에 대한 검토 (콘·설 P154) d : 유효깊이 ( 말뚝위치의 단면두께 - 저판에서의 철근덮개) bp : π × (말뚝직경 + d) * PUNCHING 전단강도 φVn = 0.700 x ( 1.06 x √240.0 x 489.460 x 105.000 ) = 590766.896 kgf ≥ PNmax = 70561.233 kgf ∴ O.K 계산서를 생성하면 위처럼 순서번호가 바꿔어 나오고 지압계수0.7와 펀칭전단계수0.8이 바뀐것 같네요. 검토바랍니다

Answer

안녕하세요. 한길아이티입니다. 수정하여 금일자 패치에 적용하도록 하겠습니다. 감사합니다.

More in this list

StatusProductNo.TitleViewsDate
AnsweredAAbutPier#268560Question about the calculation report1812026-09-29
AnsweredAAbutPier#268548Tendon force when placing tendons in the pier cap2212026-09-29
AnsweredAAbutPier#268520Pier seismic check2572026-09-23
AnsweredAAbutPier#268509Transverse reinforcement factor, K2022026-09-22
AnsweredAAbutPier#268492Girder positions in slab dimensions3462026-09-21
AnsweredAAbutPier#268483Transverse pile member forces are "0" in pier pile foundation check2032026-09-21
AnsweredAAbutPier#268482Top and bottom rebar detailing error in pier foundation STM2242026-09-21
AnsweredAAbutPier#268476Question about slab dimensions3122026-09-19
AnsweredAAbutPier#268470Settlement and bearing capacity2742026-09-18
AnsweredAAbutPier#268462Superstructure wind load in the calculation report1932026-09-18
AnsweredAAbutPier#268451Changing bearing location882026-09-18
AnsweredAAbutPier#268445Main rebar placement2972026-09-17
AnsweredAAbutPier#268438Modeling error in seismic analysis4112026-09-17
AnsweredAAbutPier#268433Pier alignment center1892026-09-17
AnsweredAAbutPier#268431Please check the design ground surface displacement2372026-09-17
AnsweredAAbutPier#268422Question about pier2692026-09-17
AnsweredAAbutPier#268416Wprov calculation in the structural calculation report2562026-09-17
AnsweredAAbutPier#268402Increasing the number of column main rebars3982026-09-16
AnsweredAAbutPier#268392Question about cast-in-place piles2262026-09-16
AnsweredAAbutPier#268387Error when entering reinforcing rebar1802026-09-16
Sign in to ask